Twitter M5 Frame Plug for 1x Drivetrain / Front Derailleur Delete
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part closes the unused opening in the frame intended for the front derailleur mounting / cable area. It is useful w
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A small frame plug designed for the Twitter M5 bicycle frame.
This part closes the unused opening in the frame intended for the front derailleur mounting / cable area. It is useful when the bike is converted to a 1x drivetrain and the front derailleur is no longer installed.
The plug gives the frame a cleaner finished appearance and helps keep dirt, water and debris out of the opening.
Features
Designed for Twitter M5
Covers the unused front derailleur opening
Suitable for 1x drivetrain setups
Simple press-fit installation
Lightweight and easy to print
No supports required
Approximate dimensions: 31 × 10 × 5.7 mm
Recommended print settings
Material: PETG recommended
Nozzle: 0.4 mm
Layer height: 0.16–0.20 mm
Walls: 3–4
Infill: 100% or at least 40–60%
Supports: not required
PETG is preferable to PLA because it is more resistant to heat, moisture and vibration, making it better suited for use on a bicycle.
Installation
Simply press the plug into the front derailleur opening in the frame.
Depending on printer calibration and frame tolerances, a very small amount of sanding may be required for the best fit.
Notes
This model was designed specifically for my Twitter M5 frame. Fitment on other Twitter bicycle models has not been tested.