1 / 1
Rear Derailleur Pulley for 626 bearing — zdjęcie 1

Rear Derailleur Pulley for 626 bearing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shimano rear derailleur pulleys to be used with 626 bearing. PLA tested for 1K+ km and counting with almost no wear

Ocena
0 / 5
Polubienia
13
Pobrania
133
Wydruki
0
Wyświetlenia
844
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I've salvaged bearings and caps from the worn-out Sram X7 derailleur pulleys and they were laying around for years. Original model was 10-teeth, so I've edited SCAD file to make it 11-teeth, printed, press-fit bearings inside and installed into Shimano Sora rear derailleur. It works perfectly as a drop-in replacement.

There are 2 versions of STLs - with supports and without supports. I've tried to print both and one with supports built-in was much more easy to print and post-process with a Dremel.

SCAD model included, so it can be modified for different bearings.

Tagi