Derailleur hanger tool / Schaltaugenlehre
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the solution for everyone who has problems with their shifting and wants to fix their derailleur hanger.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Description
This is the solution for everyone who wants to check or fix their derailleur hanger.
Model: The “Messstange” and the endcap are only required for convenience
For printing: I would recommend only printing the non-aluminum parts, and using aluminum rods and screws for the rods and Screws
I used 35% Infill and 3 wall/top layers andd PLA from FILAFARM, which seems by far strong enough.
Aluminum parts: Those could be printed, however, for the proper strength and function of the build, I recommend buying them in metal, for example aluminum.
Dimensions
big rod: diameter 12mm, length about 50cm and a small partition (60mm) for inside the headpart in order to keep the crew running properly.
small/measurement rod: diameter 4mm, length about 20cm, can vary for different bicycles
small screw: M3, pretty short and only if really necessary beacuse of a lot of waer on the part it screws into.
big screw: M10, 70mm in length, m10x1 THREAD