1 / 15
Derailleur hanger tool / Schaltaugenlehre — image 1
1 / 15

Derailleur hanger tool / Schaltaugenlehre

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the solution for everyone who has problems with their shifting and wants to fix their derailleur hanger.

Rating
0 / 5
Likes
5
Downloads
26
Makes
0
Views
330
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Description

This is the solution for everyone who wants to check or fix their derailleur hanger.

 

Model: The “Messstange” and the endcap are only required for convenience

 

For printing: I would recommend only printing the non-aluminum parts, and using aluminum rods and screws for the rods and Screws 

                         I used 35% Infill and 3 wall/top layers andd PLA from FILAFARM, which seems by far strong enough.


Aluminum parts: Those could be printed, however, for the proper strength and function of the build, I recommend buying them in metal, for example aluminum.

 

Dimensions

big rod: diameter 12mm, length about 50cm and a small partition (60mm) for inside the headpart in order to keep the crew running properly.

small/measurement rod: diameter 4mm, length about 20cm, can vary for different bicycles

small screw: M3, pretty short and only if really necessary beacuse of a lot of waer on the part it screws into.
big screw: M10, 70mm in length, m10x1 THREAD

Tags