Counting matching models…
This Throttle goes along with my G1000 setup . Its main feature is the simple design and slim layout, which (unlike regular Throttle quadrants) fits on a desktop. Instead of rotary potentiometers and a clumsy gear mechanism, it uses 100mm…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
The next member of my Flight Simulation Sixpack family has arrived: A fully 3D printed Altimeter without need for any metal axles. Articulation by a standard stepper motor similar to the Attitude Indicator and an encoder for the Baro…
Designed by DSK001, this fun little simulation lets you have digital “sand”. Tip the cube and watch the sand fall. “cube base” is an optional base that uses a standard TT motor to constantly rotate the block on your desk.
To perform laparoscopic surgery, a patient’s abdomen is inflated with carbon dioxide and laparoscopic instruments are inserted through small incisions in the abdominal wall. An admission device, the trocar, is fixed into those incisions…
A 57 mm compass for flight simulation. The code i am writing for this is on github(https://github.com/Gijs-De-Munck/Flightgear-cockpit), this repo uses an arduino mega to controll a altimeter, airspeed indicator, compass, variometer and a…
This is a stoma insert for a standard simulation manikin stoma belly. It fits perfectly, and holds up much better than the soft rubber ones provided by the manufacturer. Printed in red TPU, I used Novamaker, with tree supports.
A trim switch for flight simulators similar in size and design to the Honeywell 200-09187-0000 trim switch used in Diamond aircraft and others. In contrast to the original switch, both handle parts are fixed together for simplicity. Use…
Automatic Direction Finder (ADF) instrument. Can be used for flight simulator. Can be controlled with MobiFlight. It is compatible to mrusk's Modular Cockpit Material needed: 2 Screws M3x6 2 Screws M3x10 4 Screws M4x10 4 Screws M4x20 1…
A holder for a MAX7219 7-Segment LED Display. Can be used for flight simulator, e.g. as “Distance Measurement Equipment” (DME). Can be controlled with MobiFlight. It is compatible to mrusk's Modular Cockpit Material needed: 4 Screws M3x6…
A very easy-to-build Airspeed Indicator for flight simulation. Material needed: 2 pc 28BYJ-48 stepper motor with ULN2003 driver board 1 pc EC11 Encoder (15mm Plum) 1 pc Ø 79mm x 0.2mm transparent foil. 3 pc Screws M4x25 4 pc Screws M4x10…
This is a FreeCAD design of a print-in-place working cube in a cube gyro. I used the Assembly, Part Design and Spreadsheet workbenches to create it and have included two FreeCAD design files. Enjoy! A little support at the base of the…
What is the waveform of an ocean wave, and how does the water move. This can be demonstrated by this little simulator. The basic section has just one bar moving in a circle, but by coupling a series of sections with an offset of rotation…
I made a more sophisticated simulation of an ocean wave: https://www.printables.com/model/1569073-ocean-wave-simulation However, it was too complicated and did not work in pratice. Here is the simple version, that works! Note: You must…
A very easy-to-build Airspeed Indicator for flight simulation. Material needed: 2 pc 28BYJ-48 stepper motor with ULN2003 driver board 1 pc EC11 Encoder (15mm Plum) 1 pc Ø 79mm x 0.2mm transparent foil. 3 pc Screws M4x25 4 pc Screws M4x10…
Realistic breakable capsule model designed for medical education and nursing simulation.
Realistic breakable pils model designed for medical education and nursing simulation.
Fillable vial for injectable solution for medical education and nursing simulation in two size
Model Description – Pulse Oximeter Simulation Device This model is designed as a teaching aid for medical simulation training , representing a pulse oximeter device. It is intended for educational use in scenarios involving patient…
This model represents an oxygen pressure cylinder designed specifically for use in medical simulation environments. It allows users to connect an oxygen delivery tube and set the oxygen flow rate by adjusting and reading numeric values on…
Adapter for attaching the Simagic HPR to Nuosimulation Evo pedals. Several variants included: -Versions for 16mm or 20mm M4 countersunk screws -Versions for use with or without threaded inserts (M6x8x8)
Bu simülasyon oyunları için tasarlanmış bir düğme kutusudur
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs This 3D-printed prop replicates the appearance of standard blood culture bottles, developed to enhance the…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs This 3D-printed medicine cup prop is ideal for healthcare simulation, holding approximately 30mL—perfect for…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs In clinical simulations, having realistic equipment is essential for students to practice critical skills…
100 3D-printed dice together with two boxes and lids are used to simulate radioactive decay, since schools rarely have the materials needed for real physical experiments on radioactive decay. The activity and its evaluation for the…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs A blood alcohol test device is a crucial tool in many clinical and emergency settings for assessing blood…
A simple design that allows a standard 120*120*25mm PWM fan and ducts with a total thickness of 30mm to be mounted with only 2 screws. Required Parts One 120*120*25mm PWM fan One printed fan mount with your desired angle. The pictures…
Small case to house an Arduino Nano V3 running a Simhub Windsimulation sketch. The protoboard breaks out ground and the 3 PWM signals to the 4-Pin fan connectors and connects an external 12V powersupply. I used these headers…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs Intranasal Narcan 3D Model – Clinical Simulation Tool This 3D model of an intranasal Narcan device is designed…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs In clinical simulations, it’s crucial to provide students with the right tools to develop their technical and…
This is a modification of the SpineBox developed by Clifton et al to include a luer lock attachment for a simplistic durotomy repair simulator. Simulator assembled using 5/8th silicone penrose drain, 2-0 silk ties, and IV tubing with IV…
A simulation of benchy in waves i made in blender. MMU, and without-benchy versions soon
Print using 0.1 mm preset, printed on prusa mini+ with 0.4mm nozzle Done in blender using built in cloth simulation
This 3D-printable set of cervical dilator props was created by Elizabete Kenina at the Medical Education Technology Centre of Riga Stradiņš University (RSU METC) for use in clinical simulations and gynecology training workshops, such as…
Bring realism to your flight simulator with this A320 landing gear lever replica. Built using just two limit switches, a few screws, a spring, and an Arduino (Mega, Mega Pro Mini, Pro Micro, Uno, or Nano), it’s simple and effective. Fully…
Cochlear's Osia 2 is an external sound processor that links to the OSI200 or OSI300 BAHA implant via an inductive coil. This model is intended to be used as a simulation for education or to help people familiarize themselves with the unit…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one questions the value of clinical simulation for training healthcare professionals—both students and…
I am working on a simulated Ham Radio 2000 Watt Linear Amplifier. As part of it I need four simulated 500 Watt RF Power Amplifier tubes. The eventual amplifier simulation will include a box and some controls. Besides simulated an RF amp,…
This simulation model is designed for use with the DoBot robotic arm. It provides a safe and practical way to practice the setup of a welding robot, without requiring any real welding equipment. The model fits securely into the DoBot base…
Der originale Detend des Moza MTP ist aus meiner Sicht für einen Airbus-Schubhebel nicht geeignet. Der von mir entworfene Detend hat alle für einen Airbus notwendigen Rastungen: Rev Full, Rev Idle, Idle, Climb, Flex, TOGA. Druck: PLA, 3…
If you’d like to support my work, you can treat me to a cup of hot chocolate here: 👉 buymeacoffee.com/aleksandrs Clinical simulation is a powerful way to prepare both students and professionals for real-life healthcare situations. Still,…
Turn your cleaning routine into a rodeo show! This project is still a work in progress. Sorry, I haven’t had the chance to fully optimize it yet, but I will provide an updated version as soon as possible. This 3D printable accessory…
If you’d like to support my work, you can treat me to a cup of hot chocolate here: 👉 buymeacoffee.com/aleksandrs Realistic 3D-printed antigen test prop for simulation and education. Safe, inert, and reusable — ideal for COVID-19, Flu A/B,…
Introduction I am new to the flight simulation hobby, 3D printing, and CAD design, so please be patient with me. I decided to create my own throttle quadrant to enhance my immersive experience. This is intended for flight simulation…
My remix of Gyro Compass by @mrusk A fully 3D printed Gyro Compass. Articulation by two standard stepper motors and 2 encoders for the Heading Bug adjustment and Vacuum DG sync. Print the Spacer Frame for the Glass (Ring_Transp.stl) in…
This is a FreeCAD design of a print-in-place working cube in a cube gyro. I used the Assembly, Part Design and Spreadsheet workbenches to create it and have included two FreeCAD design files. Enjoy! A little support at the base of the…
This download includes ISO-sized ampoule models designed for educational and simulation purposes. The ampoules are intended for use in medical training and simulation scenarios, allowing users to practise: handling and manipulation of…
I started this project to build my own six-pack gauges for flight simulation, but I used a 4-inch LCD screen instead of 3D-printed physical parts and stepper motors because I don’t like the noise they generate. The display is a 4-inch LCD…
What is the waveform of an ocean wave, and how does the water move. This can be demonstrated by this little simulator. The basic section has just one bar moving in a circle, but by coupling a series of sections with an offset of rotation…
I made a more sophisticated simulation of an ocean wave: https://www.printables.com/model/1569073-ocean-wave-simulation However, it was too complicated and did not work in pratice. Here is the simple version, that works! Note: You must…
This has fairly tight clearances and comes off the build surface ready to go. I have had one print where the gears need each to be gently pushed downward to the square base to release them from the pins. I have uploaded a second STL…
A SolidWorks-based CAD model of a Smart Traffic Control & Monitoring System designed to simulate intelligent urban traffic management infrastructure. The model features modular traffic signal units, integrated sensor housings,…
Realistic breakable capsule model designed for medical education and nursing simulation.
Realistic breakable pils model designed for medical education and nursing simulation.
Fillable vial for injectable solution for medical education and nursing simulation in two size
This cable guide chain is part of a Fischertechnik simulation project, which involves simulating a high-bay warehouse. The cable chains are needed for the X and Z axes. The chain shown has the following dimensions: 115mm x 25mm x 15mm.…
Model Description – Pulse Oximeter Simulation Device This model is designed as a teaching aid for medical simulation training , representing a pulse oximeter device. It is intended for educational use in scenarios involving patient…
This model represents an oxygen pressure cylinder designed specifically for use in medical simulation environments. It allows users to connect an oxygen delivery tube and set the oxygen flow rate by adjusting and reading numeric values on…
Keep score and time for the following 9 sports: Baseball Basketball Football (American or Canadian) Hockey Cricket Boxing Golf Tennis Bowling PDFs included: parts list Keypad wiring and Arduino set-up instructions Raspberry Pi set-up…
On my research and several tries of getting a satisfying feeling and feedback of the Fanatec's CSL Load Cell I ended up with that solution. I was missing the feeling of the pressure point of a real brake of a car and this one comes very…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs This is a 3D-printable tabletop simulation toolkit designed for clinical simulation, hospital and prehospital…
Ender 3 - Nozzle Cooling "with Airflow Simulation" Printing: Recommended to be printed in any temperature resistant filament (ABS / ASA / PBT / Nylon / PETG) "But I've tested with PLA and still works" Don't change the part orientation…
See 3mf for color color change layers. Printer with .4 nozzle at .2mm layer height.
id : g014 name : Simulation glass LampShade size : 120X120X106 mm files : 1 pieces : 1 maximum size of the component:120X120X106 mm total print time : 4h:33m raft : yes support : no Can be used with lamp base :…
made with rhino 7/grasshopper/kangaroo 2/anemone you can print without top/bottom/infill, or use surface option in surface mode in Cura this is a school project & installation use a brim for better adhesion
This is a decoy heart telemetry tool for nursing and pre-med students. The parts are broken into different pieces so that different colors can be used to make the decoy more realistic. Lightly sand any area that will be glued together…
This is an outlet, inlet and electronics enclosure design the for SimHub Wind Simulator feature that allows to you to control fans via your racing simulation. You can implement effects like static wind or wind that changes with speed.…
This is a slightly modified version of the original Attitude Indicator by ZockZock . It provides a new designed bezel (as pdf) and a profiled indicator for two color print (white on black). Design and color scheme resembles the original…
A Flap Selector Switch handle for Flight Simulation. Use with APEM 639H/2 or 637H/2 Switch. Assemble both parts with some short filament segments and superglue. See also my Gear Switch for Flight Simulation
A Gear Switch handle for Flight Simulation. Use with APEM 631H/2 Switch or similar. Assemble both parts with some short filament segments and superglue. See also my Flap Selector for Flight Simulation
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method for teaching both future and existing medical…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method of teaching future and existing medical…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method of teaching future and existing medical…
A very easy-to-build Variometer for flight simulation. In analogy to my Airspeed Indicator it comes in two different versions: Either articulation by an SG-90 micro servo or with a 28BYJ-48 stepper motor (recommended). UPDATE 2024-12-21:…
A very easy-to-build Airspeed Indicator for flight simulation. It comes in two different versions: either articulation by an SG-90 micro servo or with a 28BYJ-48 stepper motor (recommended). UPDATE 2024-12-21: Fusion 360 Source added…
A glass front for my Flight Instruments to increase the realistic effect. UPDATE 2022-12-24: Larger screw holes Ø 79mm x 0.2mm transparent foil needed. Fits to: Variometer for Flight Simulation Airspeed Indicator for Flight Simulation…
A modular cockpit panel for my Flight Instruments. The 100x100mm modules can be stacked vertically and horizontally as desired. Connection is done by M3x6 screws, M3 threads are included in the model on top and right side. UPDATE…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method of teaching future and existing medical…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method of teaching future and existing medical…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method of teaching future and existing medical…
My Flight Simulation Sixpack Family keeps growing: A fully 3D printed Gyro Compass. Articulation by two standard stepper motors similar to the Altimeter and an encoder for the Heading Bug adjustment. UPDATE 2024-12-21: Fusion 360 source…
And finally a fully 3D printed Turn Coordinator. Articulation by two standard stepper motors similar to the Gyro Compass. Adapted spacer frame is included in this model to hold the marking frame. Update 2024-12-21: Fusion 360 Source added…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method of teaching future and existing medical…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method for teaching both future and existing medical…
This is a state-of-the-art environment simulation that I created so that I can test out my robotic creations in an isolated environment before I release them into the real world. It would be unfortunate if one of my robots misbehaves and…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs The vitals monitor plays a crucial role in clinical simulations, enhancing the realism and educational value of…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs The pulse oximeter is an important tool for monitoring the patient's vital parameters, and therefore no clinical…
Modifications made to add a temperature indicator disk and a knob. Back plate has 2 options depending on your stepper motor driver board.
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs Introducing a fun and practical mold designed to create a single silicone pasta piece—specifically, a Fusilli…
Pour le faire fonctionner j'ai branché les bouton sur les périphériques d'une vielle souris
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs The pulse oximeter is a vital tool for monitoring patients' essential parameters, making it indispensable in…
This 3D model is designed specifically for professional filmmakers who wish to simulate camera arm movements with a car before actual shooting. It's tailored for 1:43 scale SUV model cars. Simply print it out and assemble the pieces using…
An optional switch panel for my Modular Cockpit Panel . The 100x100mm module hosts 8 switches (e.g. Marquardt 1811.1202) for lights etc. and can be stacked vertically and horizontally with the flight instruments. Connection is done by…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs In clinical simulations, it is essential to equip students with the appropriate tools to practice their…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs It's hard to envision a clinical simulation of childbirth without the essential step of clamping the umbilical…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs When you print the model, you can do so without supports , making the process smooth and easy! To get everything…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs The Pinard Horn is a specialized type of stethoscope designed specifically for monitoring the heart rate of a…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs In clinical simulations, it is essential to provide students with the right equipment to practice their…
![Telebox--Heart Telemetry Simulation Tool [with Clipping Leads]](https://media.printables.com/media/prints/30278/images/301017_4f9104b0-c541-4711-99d9-ba57f18c9180/telebox-5-lead-v3.png)
