Sram Front Derailleur Stiffener Washer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple printable inexpensive replacement for the $40 front derailleur kit from Sram. Plastic shouldn't be $$$$
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I went online to check the pricing of these plastic parts and could not believe my eyes when I saw a few titanium bolts were lumped in with these plastic bits and it would cost me an arm and a leg. So I decided to model and print these out. They do not have the guide tab, which makes it so much easier to print, but may cause slight headaches when installing.
You'll need one M2.5x8mm button head screw to hold these in place.
Printed with a 0.25mm nozzle, 2 walls, 15% gyroid infill, PLA or PETG works good enough. No supports needed.