P
Printablesantionion
SRAM eTap/AXS Cover for Battery Block
SRAM eTap/AXS Cover for Battery Block | Front/Rear Derailleur and Dropper Post Print in PLA 0.4 mm Nozzle 0.2mm Layerhight. Supports Yes
- Pobrania
- 1205
- Polubienia
- 56
- Ocena
- 5
Wyniki wyszukiwania: axs
Liczymy pasujące modele…
P
PrintablesTrimetric
SRAM AXS Charger Holder
If you own more than one bike with a SRAM AXS groupset, you may have accumulated a few of the single battery chargers (EP-EAC-BC-A1) like this one: The individual chargers are very light and the cables tend to cause them to slide around…
- Pobrania
- 718
- Polubienia
- 50
- Ocena
- 5
P
PrintablesLuckyMenace
SRAM eTap / SRAM AXS Battery Blank with Keyring Hole
After a ride in which I lost power to both my seat dropper and derailleur as I hadn't charged them, I went looking for a solution - to both reminding me to charge, and also reminding me not to forget batteries on my next ride. I…
- Pobrania
- 523
- Polubienia
- 41
- Ocena
- 5
P
PrintablesMongooseTNM
REV Robotics MAXSwerve Covers
A collection of covers and protectors for REV Robotics MAXSwerve that 2811 has been using on our modules. The Gear Dust Cover has grease holes so you don't have to disassemble the module to regrease. If you use Fusion 360 you can open the…
- Pobrania
- 494
- Polubienia
- 17
- Ocena
- 5
P
Printablesvidision
SRAM AXS battery and charger organizer
Designed to hold the SRAM AXS charger and 3 batteries or battery covers
- Pobrania
- 475
- Polubienia
- 54
- Ocena
- 4,75
P
PrintablesAndreas Fink
SRAM AXS Road Brake Caliper Piston Cleaning and Bleeding Block
Sometimes caliper pistons get stuck due to dust and dirt. For cleaning you need to push them out. If you do it wrong they fall out and you loose your breaking fluid and need to bleed the whole system. With this design you can push out one…
- Pobrania
- 405
- Polubienia
- 40
- Ocena
- 5
P
PrintablesTiger3DPrinting
Sram AXS battery cover
I couldn't find a axs battery cover that worked for both road bikes, gravel bikes, and mountain bikes so I made my own. hopefully this helps someone. tolerances are tight.
- Pobrania
- 375
- Polubienia
- 31
- Ocena
- 4,75
P
PrintablesKrystian
Tool for SRAM Rival/Apex/Force AXS Power Meter V2
A simple tool to help assembly and disassembly SRAM Rival/Apex/Force AXS Power Meter (QUARQ) from the crank. 2026-FEB-14 Update: V2 Release: The updated model features an improved fit and an additional lever function, allowing you to pry…
- Pobrania
- 320
- Polubienia
- 26
- Ocena
- 5
P
PrintablesVasKeZ
Sram AXS Ultimate Pod Button Cap Replacement
I broke the bottom button off my Sram AXS Ultimate shifter pod right before I'm supposed to bring my bike on vcay to Whistler. I tried looking around the web, calling the LBS's and NOBODY has them! Lame. Apparently the part is too new and…
- Pobrania
- 307
- Polubienia
- 28
- Ocena
- 5
P
PrintablesCortado Concepts
AXS Wireless Shift Pod Adapter for Magura Matchmaker Brake Clamp
Crafted with precision and adjustability in mind, this adapter ensures a secure and ergonomic fit, allowing you to optimize your bike's cockpit for a cleaner, more efficient setup. No need for extra clamps or complicated adjustments – our…
- Pobrania
- 277
- Polubienia
- 14
- Ocena
- 3,5
P
PrintablesRaphael
SRAM AXS Wallmount
Wallmount for 3 AXS Batteries and 1 AXS Charger
- Pobrania
- 253
- Polubienia
- 22
- Ocena
- 5
P
Printablesontopathogenic
Box for sram axs battery
magnet (.2dim x .o65 thick) inches
- Pobrania
- 251
- Polubienia
- 30
- Ocena
- 0
P
PrintablesNick Roosen
SRAM Eagle AXS Controller Discrete Clamp
Replacement clamp for SRAM Eagle AXS Controller. Out of stock EVERYWHERE when I needed one. Clamp bolt is replaced with an M4x10 into an M4 Heatset insert.
- Pobrania
- 229
- Polubienia
- 24
- Ocena
- 5
P
PrintablesDaniele
Compact Sram AXS Pod bar clamp
Compact Bar Clamp for the Sram AXS pod controller, it needs to be printed using carbon filament. This specific choice of material is crucial, as it imparts the bar clamp with the essential torsional stiffness required for optimal…
- Pobrania
- 173
- Polubienia
- 15
- Ocena
- 0
P
PrintablesCamPaine
SRAM AXS Charger Wall Mount - 2 Chargers - Short
This is a wall mount for 2 SRAM AXS chargers. I have taken the original file and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and I can change the…
- Pobrania
- 171
- Polubienia
- 8
- Ocena
- 5
P
PrintablesTimmaey
SRAM Battery Cover for Pod AXS Controller
I created this design after losing my battery cover on a rough trail and finding that a replacement was out of stock everywhere. Even SRAM couldn't point me to an online shop with one available! If you take a close look, you might notice…
- Pobrania
- 168
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMike4D
SRAM AXS Disc Brake Caliper Alignment Tool
Don’t expect it to work 100% of the time—not even 50%. This tool WON’T replace visual/audible alignment. I don’t even know why I designed it; it may work sometimes. Fits SRAM RED/Force/Rival and others AXS groups. The 4 mm hole is only…
- Pobrania
- 142
- Polubienia
- 12
- Ocena
- 0
P
Printableswoelpi
SRAM AXS bleed block
My old bleed kit didn't have this new bleed block. So I did make my own one instead of waiting for a online ordered one. It should be compatible with these brakes: This is NOT an official posting by SRAM.
- Pobrania
- 141
- Polubienia
- 9
- Ocena
- 4,5
P
PrintablesCamPaine
SRAM AXS Charger Wall Mount - 1 Charger - Short
This is a wall mount for 1 SRAM AXS charger. I have taken the original file and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and I can change the…
- Pobrania
- 132
- Polubienia
- 13
- Ocena
- 4,75
P
PrintablesAdrian Glover
SRAM AXS Battery Blank with Keyring Hole
Allows for a "Remove Before Flight" tag on all current SRAM AXS derailleurs.
- Pobrania
- 125
- Polubienia
- 11
- Ocena
- 5
P
PrintablesVincent ANDRE
Maxspect biosphere support for reef tank sump
Support to nicely manage your Maxspect Biosphere in your sump Category: Tool Holders & Boxes
- Pobrania
- 119
- Polubienia
- 9
- Ocena
- 0
P
Printablesdmtr7yonov
additional handles for kugoo karin maxspeed electric scooter
When my daughter asks to take her for a ride on an electric scooter, she was not quite comfortable and she could fall from any maneuver. therefore, I designed additional handles that turned out to be quite strong and now she is happy to…
- Pobrania
- 115
- Polubienia
- 15
- Ocena
- 0
P
PrintablesVincent ANDRE
Maxspect biosphere support for reef tank sump (variation)
Support to nicely manage your maxspect biospheres in your sump Category: Tool Holders & Boxes
- Pobrania
- 107
- Polubienia
- 3
- Ocena
- 0
P
Printablesea_dev
Fluval Evo V 13.5G / 52L Maxspect’s Nano-Tech BioSpheres Stand
A stand that is about 60mm tall and goes into chamber 1, it holds 10 BioSpheres made by Maxspect, specifically the Nano-Tech BioSpheres. The central shaft is for being able to pull it out when needed. I use this in conjunction with a…
- Pobrania
- 98
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFelix Boesch
Vent Valve Tool for RockShox Reverb AXS Dropper Post
Tool to bleed the Rock Shox AXS Dropper Post on its Vent Valve System. Follow the Rockshox official tuturial video (Youtube) for instructions how to use. Quick fix if your dropper post feels squishy and needs a bleed. Duration of the…
- Pobrania
- 94
- Polubienia
- 4
- Ocena
- 0
P
Printableseagleeye
SRAM AXS charger wall mount
Mountings for the SRAM AXS charger to mount it in your workshop Printed in PLA and 10% infill
- Pobrania
- 91
- Polubienia
- 24
- Ocena
- 5
P
PrintablesCamPaine
SRAM AXS Charger HSW Mount - 2 Chargers - Short
This is a Honeycomb Storage Wall compatible mount for 2 SRAM AXS chargers. I have taken the original file, made it HSW compatible and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems…
- Pobrania
- 84
- Polubienia
- 13
- Ocena
- 0
P
PrintablesDaniele
Hope Tech3 Sram AXS POD clamp
Clamp specifically designed for seamless integration with the SRAM AXS pod controller and the HOPE Tech3 lever. This clamp needs to be printed using carbon filament, ensuring superior torsional stiffness essential for maintaining…
- Pobrania
- 83
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMgr. Pavel Krist
LEGO Royal Mail Paxster
LEGO Royal Mail Paxster
- Pobrania
- 73
- Polubienia
- 20
- Ocena
- 5
P
Printablesvidision
SRAM AXS Battery Port Cover
First go at a battery port cover for SRAM AXS. The prototype is in grey, but a larger and more visible flag is the goal.
- Pobrania
- 73
- Polubienia
- 6
- Ocena
- 5
P
PrintablesMarshalliom
Maxspect ICV6 & Gyre Mount
Controller mount that is suitable for use with all of the following: Gyre 200 series Gyre 300 series Turbine Duo Aeraqua skimmer controller ICV6 wireless hub Printed with PLA+, supports required for the little nib at the top.
- Pobrania
- 72
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJedla
Reduction from saxophone lyre to trumpet lyre / redukce lyry na saxsofon pro trubku
For using the saxophone lyre on the trumpet / Pro použití saxofonové lyry na trumpetu
- Pobrania
- 72
- Polubienia
- 8
- Ocena
- 5
P
Printablesbakeram1
ExceedRC Maxstone 8 Rear Axle Steering Servo Mount
Printed with PETG at 0.2mm layer height, no supports
- Pobrania
- 71
- Polubienia
- 9
- Ocena
- 0
P
PrintablesCamPaine
SRAM AXS Charger HSW Mount - 1 Charger - Short
This is a Honeycomb Storage Wall compatible mount for 1 SRAM AXS charger. I have taken the original file, made it HSW compatible and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems…
- Pobrania
- 65
- Polubienia
- 3
- Ocena
- 0
P
Printablesjgoep
Stanley Maxsteel Protective Jaws Vise Schonerbacken Schraubstock
Schonerbacken für Stanley Maxsteel Mini-Schraubstock / Protective Jaws for Stanley Maxsteel Mini Vise
- Pobrania
- 62
- Polubienia
- 8
- Ocena
- 5
P
PrintablesJannisJFry
CoaxShark Wire Stripper (with pencil sharpener blade)
I was looking to remove the outer shell from some RG316 cable and had no good tool laying around... But I had a old pencil sharpener, a 3D-Printer and an idea, so this is what came out. I thought it was looking like a shark, so I added a…
- Pobrania
- 59
- Polubienia
- 24
- Ocena
- 0
P
PrintablesCamPaine
SRAM AXS Charger Wall Mount - 4 Chargers - Short
This is a wall mount for 4 SRAM AXS chargers. I have taken the original file and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and I can change the…
- Pobrania
- 59
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBrett
Maxspect Jump SK Series Protein Skimmer Controller Holder
Printed without support. Holds the skimmer controller very nicely. I have it screwed to some plywood. I forget the size screw that I used, but it was some normal size flat head screw from the hardware store. Probably #8 if I had to guess.
- Pobrania
- 55
- Polubienia
- 8
- Ocena
- 0
P
Printablespeterloron
Stanley MaxSteel Measuring Tape Holder - Peglock
This is a slight remix of @WDNick's Stanley Tape Measure Holder. It is a little longer and wider to accommodate the larger size of the MaxSteel tape measure. It uses the peglock type clips which you can easily find by searching. I used…
- Pobrania
- 52
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBJKeane3
Sram AXS pod battery door tool
This is obviously very simple but it has to be one of my most satisfying models to use.
- Pobrania
- 49
- Polubienia
- 6
- Ocena
- 0
P
Printablesmadonius
SRAM AXS charger Gridfinity holder
A gridifinity holder for the SRAM AXS charger
- Pobrania
- 41
- Polubienia
- 7
- Ocena
- 5
P
PrintablesCamPaine
SRAM AXS Charger HSW Mount - 4 Chargers - Short
This is a Honeycomb Storage Wall compatible mount for 4 SRAM AXS chargers. I have taken the original file, made it HSW compatible and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems…
- Pobrania
- 41
- Polubienia
- 3
- Ocena
- 0
P
Printablessjc115
Sram AXS battery, dummy/clone
This is a clone of a Sram AXS battery used in derailleurs and seat posts. I use this when I take my battery out to charge or for transport so that the latch isn't hanging loose. The hole in the back is for attaching a string/rope/flag so…
- Pobrania
- 40
- Polubienia
- 1
- Ocena
- 0
P
Printablesnickb916
TRP DHR Evo Integrated mount for AXS Pod Controller
This design is both the left and right sides to mount AXS Pod Controllers to TRP DHR Evo brake levers. The infinite clamp that comes with the pods is pretty sleek, but I didn’t like some aspects of it and wanted an integrated mount. I…
- Pobrania
- 39
- Polubienia
- 9
- Ocena
- 0
P
Printables3DBrian
French Cleat - Sram AXS 4-Port Battery Dock and Holder
This french cleat holder is made to fit a french cleat with dimensions of 11.5mm x 45deg cleat of 55mm height. Your mileage may vary, but this seems like a pretty standard width and height of french cleat. Feel free to reach out for other…
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBrycel307
Gearbox Cover for REV MaxSwerve
Fits into the gearbox of a MAXSwerve module, install the bottom piece during assembly. Note that there are different models for right and left assembly, please check which one you have assembled or else the encoder cable will not fit.…
- Pobrania
- 38
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBognerAqua
Maxspect Etherial E8 Light Shade
Light shade for the Maxspect Etherial E8 aquarium LED Light Due to the large size, you will need a printer with a sizable print bed. Alternatively, you can use your slicer or the STEP file to print the shade in multiple, smaller pieces. I…
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 5
P
PrintablesCamPaine
SRAM AXS Charger HSW Mount - 3 Chargers - Short
This is a wall mount for 3 SRAM AXS chargers. I have taken the original file, made it HSW compatible and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and…
- Pobrania
- 31
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTroottsy
Rev MAXSwerve 3in Covers V1.3.2
Rev MAXSwerve coverings designed by Team 2084 Feel free to use on your robot Please keep the non-visible team branding on model Top twist-on cover is intended to be modified to accommodate features on top of it eg. April Tag cameras, and…
- Pobrania
- 28
- Polubienia
- 5
- Ocena
- 0
P
Printablesplex41
clamping protection Stanley MaxSteel 1-83-068
vise clamping protection for Stanley MaxSteel 1-83-068 150mm width
- Pobrania
- 28
- Polubienia
- 10
- Ocena
- 0
P
PrintablesR. Q.
Spax Screw Cover and Hook and Decoration. Spaxschrauben Abdeckung, Haken, Verkleidung.
Spax Screw Cover and Hook and Decoration. Spaxschrauben Abdeckung, Haken, Verkleidung. The dimensions of the model make it fit tightly but it can be put together by hand without tools. I used a layer height of 0.1 mm. I guess 0.2 would…
- Pobrania
- 28
- Polubienia
- 4
- Ocena
- 0
P
PrintablesCamPaine
SRAM AXS Charger HSW Mount - 3 Chargers - Short
This is a Honeycomb Storage Wall compatible mount for 3 SRAM AXS chargers. I have taken the original file, made it HSW compatible and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems…
- Pobrania
- 28
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFuzzyRaptor
Waxstamp
The idea was to use filament from failed prints as "wax". It doesn't work because the material was way too sticky. Not everything goes as planned But I'm posting it anyway because someone might find it useful. Should still work with wax…
- Pobrania
- 27
- Polubienia
- 11
- Ocena
- 0
P
PrintablesBJKeane3
Rockshox AXS Reverb clamping jaws
Vice soft jaws for clamping the upper or lower section of a 30.9 AXS Reverb Dropper. The magnets I used are 5mm diameter x 2mm and are friction fit but you could also glue them. I printed these with 60% infill to ensure they will hold up…
- Pobrania
- 26
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJan Prokop
Maxspect Gyre XF130/230 and 150/250 - inner drive bushing
Maxspect Gyre XF130/230 and 150/250 - inner drive bushing Printed from PET-G 0.6 - nozzle
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPugrider15
Low-Profile 2x Vertical Mount for SPARK MAXs
In order to compactly fit all of our necessary Sparks inside my team's 2" tall belly-pan, I designed a vertical mount that's only 1.75" (44.45mm) tall. With Sparks, it's a little over 2" (50.8mm) wide and 4.5" (114.3mm) long. I was…
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
Printablesh2389f0an3
SRAM AXS Battery Nose Repair / Replacement Tab
Save your broken SRAM AXS battery! The fragile plastic nose that locks the battery into your derailleur or dropper post often breaks off, forcing an expensive replacement. This 3D-printed repair tab restores full functionality. How it…
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
Printablesvidision
SRAM AXS magnetic holder
I inserted a pause at 2.6mm layer height for the insertion of magnets. Five generic 10x2mm magnets is just barely enough to hold this in place on a vertical surface. I scuffed the PLA print surface with 80 grit sandpaper to reduce the…
- Pobrania
- 23
- Polubienia
- 7
- Ocena
- 0
P
Printablestheo
Sony AXSM cards holder (up to 6 cards)
I use this box for keeping my AXSM cards organised while shooting. This box is perfectly sized for fitting camera cards with their original boxes. It can store up to six cards.
- Pobrania
- 21
- Polubienia
- 9
- Ocena
- 0
P
PrintablesHyperSprite
Sram AXS Charger base for two for Peglock
This adds a peglock back to the original model. Wait, there's no pegs on the back, how do I attach this This model uses the peglock system. For more information, check out my peglock collection .
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMike4D
SRAM Front Derailleur Shims / Spacers for all AXS E1 Groups
SRAM Front Derailleur Shims E1 Group, in 3 variants. The 16.5mm is made for Cervelo Caledonia 5 to fit 43T/30T chain-ring as the derailleur needs to be dropped to the bottom of the hanger. May fit also other brands and sizes. The E1 shims…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
Printables2Wired
R5 MAXSpline Extrusion Wire Guard
Wire guard for running wire through VEX MAXSpline Extrusion
- Pobrania
- 20
- Polubienia
- 8
- Ocena
- 0
P
Printableskentvoss
Feedback AXS Dropper Clamp 27.2
This is designed for a Feedback Sports stand, to clamp a dropper seat post securely without clamping the telescoping part of the post. The post diameter in the design in increased by 1.4mm to account for the inner tube liner which…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSagittarius Artworks
MAXSYM 400 / 400i Mirror Mount Cover
Lost one of the plugs a short time ago and there exist no replacement parts without getting a complete mirror. So i meassured the remaining plug and printed the new plugs in TPU95A. They fit, but i had to do a few more with slight changes…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
Printables2Wired
R5 MAXSpline Extrusion Wire Guard w/ Hole
Wire guard with a hole cut in the center for running wire through the center of the VEX MAXSpline extrusion
- Pobrania
- 18
- Polubienia
- 4
- Ocena
- 0
P
Printables2Wired
R5 MAXSpline to Hex Shaft Endcap
Endcap for the VEX MAXSpline tube, that centers hexshaft for encoder use
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDamien Berna
MAXSwerve Motor controller mount and motor guard
I'll update this with bom/other stuff, if you have any questions feel free to reach out on twitter @karposaurus_
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
Printables1944GPW
DEC VAXstation VSXXX-AA puck mouse roller wheel replacement
The old DEC VAXstation VSXXX-AA mouse designed by Hawley used a XY tracking arrangement of two roller wheels with their axes canted at about a 10 degree angle, one for vertical and the other for horizontal. This not very popular design…
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesChris.B
Stanley Maxsteel minivice jaw protectors
My Stanley Maxsteel minivice was delivered with only one soft jaw protector. Here the replacement TPU printable part, made with Fusion360.
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 5
P
PrintablesBjoern101
Holder for Maxspect Aquarium LED
this LED holder is build for 6mm thick glas
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBjoern101
Maxspect holder extender
this is an add-on for my Maxspect LED holder also for 6mm thick glas
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTheRealKevin T
Garmin, iPod, Petzl, ETAP, AXS, Coros Device Charging Station
I got tired of storing all my activity gadgets in a box. I had this idea of a charge station and made mounts to accommodate most of my items. This thing includes the following: Female mount for Garmin Computer/Varia Rear Light Male mount…
- Pobrania
- 9
- Polubienia
- 10
- Ocena
- 0
P
PrintablesConnor Masini
MaxSwerve Module Cover
Protective cover for REV MaxSwerve Module. Pause print near the end to capture 3/8" locknuts. Mount with 2.5" 10-32 bolts on grid tube with .5" spacing. Will update with actual picture eventually, but this has been printed and does…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKilow
Crestline eMTB frame plugs and AXS cable clip
I made several parts for a Crestline eMTB RS181.2. Plugs for the unused holes in the frame when using a wireless dropper and wireless shifters (SRAM AXS). There one for two holes and a single. These are best printed in TPU so that is…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSpencer Pablo
SRAM AXS dummy battery with keychain hole
AXS dummy battery to keep in place while the bike is not being ridden--with a keychain hole to hold a tag. Recommend PETG. 50% infill.
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
Printablessvk91
SRAM AXS Shifter Dummy for Indoor Bike / Zwift Bike
SRAM AXS Shifter Dummy for Your Indoor / Zwift Bike Want that authentic SRAM AXS feel on your indoor bike without installing the expensive originals? Then this model is exactly what you're looking for! I scanned the internals of my…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Tool for SRAM Rival/Apex/Force AXS Power Meter V2
A simple tool to help assembly and disassembly SRAM Rival/Apex/Force AXS Power Meter (QUARQ) from the crank. 2026-FEB-14 Update: V2 Release: The updated model features an improved fit and an additional lever function, allowing you to pry…
P
Printables
Stanley Maxsteel minivice jaw protectors
My Stanley Maxsteel minivice was delivered with only one soft jaw protector. Here the replacement TPU printable part, made with Fusion360.
P
Printables
MAXSpline and SplineXL bearing shims
SplineXL tubes are notoriously loose in bearings due to the rounded crown of the tube. This provides little surface area to ride on the bearing. MAXSpline is slightly better, but can use some help on occasion. These tubes are 1 way…
P
Printables
AXS/eTap battery organizer
Simple wall hanged organizer for etap batteries, you can cut it down in slicer to reduce slot numbers.
P
Printables
Spacers for AXS SRAM shifter (non POD version)
Spacer to adjust height / position to the shifter
P
Printables
Sram AXS E1 flat mount caliper cover
Simply caliper cover for flat mount brake I made it for Rival, maybe RED/FORCE work too *my rival calipers is little bit different, ~0.2mm one is large, tuning it on slicer. filament : ABS/ASA/PC
P
Printables
clock cover for maxstok
כיסוי קדמי לשעון ממקסטוק, במקור ניתן לראון את כל הלדים והמסגרת ללא קשר עם דולקת או כבוייה, הכיסוי מציג רק את הנורות הדולוקות, עובי הכיסוי הינו 1 מ"מ והודפס בצבע טכלת אבל ניתן להדפיס בכל צבע - רצוי לבצע בדיקה שאכן הלדים נראים לאחר הכיסויץ…
P
Printables
Stanley Maxsteel Backenschutz
Durch die Riffelung können runde Gegenstände im Schraubstock besser und fester eingespannt werden. Das zu bearbeitende Bauteil bleibt auch bei gröberer Bearbeitung an seinem Platz im Schraubstock. Ich habe die Teile mit diesem Filament…
P
Printables
Pin Jaws for STANLEY MAXSTEEL Multi Angle Vice
I designed these parts to hold coins on top surface to polish and engrave. However, this setup can be used for a range of applications due to its flexible pin placement. This setup can hold PCB's for soldering too. The jaws can be printed…
P
Printables
ADXL345 x-axsis mount
Hey there and welcome to this design! Why I made this design? I was upgrading my Ender 3 S1 to Klipper3D firmware using MainsailOS and I was looking for an easy option to mount an ADXL345 accelerometer on the X-Axsis. None of the designs…
P
Printables
SRAM AXS Battery Reminder Clip (onto MTB grip)
One of these days I will head out and forget the AXS batteries on the charger…. Designed to clip on MTB grips. I didn't want to put it on my carbon fiber handlebars and risk scratching it or spend time sanding the sharp edges. I printed…
P
Printables
The #gMaxSize Gear Vase
This is the #gMaxSize Gear Vase that was created in AutoDesk Fusion360 using the Sweep Object on a Spline based on an SVG Graphic inserted into Fusion360, check out the video on how we made this! Printer: gCreate gMax 1.5XT+ Featuring E3D…
P
Printables
HemeraXS Revo Part Cooling Fan
I edited the original part to remove the bottom surface fillet so that the part can print without supports
P
Printables
Maxspect Gyre XF350 euro bracing mount adpater
print and slide it on your gyre then you can mount your xf350 on the euro brace
P
Printables
AXS POD Controller Infinite Clamp
Infinite Clamp for installation of your POD Controller. Position is a bit different to the Original also the fixture. It Works with an M4 Bolt and a Nut.
P
Printables
OnStep MaxSTM3.6 Box for mount on EQ5 mount
This is building on top of the design from MikeyB from OnSteps forum. You can see the original here: https://onstep.groups.io/g/main/files/3D-printables/Board%20enclosures%20%28Cases%29/Max%20series%20cases/MaxPCB%20case%20by%20MikeyB…
P
Printables
AXS Battery Clip
• reminder clip for Sram AXS battery • fits on normal handlebars with a diameter of 22,2mm • printable without supports