1 / 4
SRAM AXS Shifter Dummy for Indoor Bike / Zwift Bike — zdjęcie 1
1 / 4

SRAM AXS Shifter Dummy for Indoor Bike / Zwift Bike

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

SRAM AXS shifter dummy for indoor bikes. Uses original SRAM hoods and Zwift Click for a realistic shifting feeling

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
2
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

SRAM AXS Shifter Dummy for Your Indoor / Zwift Bike

Want that authentic SRAM AXS feel on your indoor bike without installing the expensive originals? Then this model is exactly what you're looking for!

I scanned the internals of my original SRAM FORCE AXS E1 shifter and recreated a dummy based on it that replicates the contour of the original shifter. Combined with the original SRAM rubber hoods (sold separately, SRAM Hood Cover | Shift / Brake Lever RED AXS E1), the parts feel just like the original on the bike – just without the costly electronics inside.

Special feature: The brake levers are modified to directly accept the Zwift Click mounts. This gives you shift paddles in AXS look with full Zwift control.

Print settting:

  • Material: PLA

  • 0,2 mm layer height, 7 wall lines

  • 35% Infill

  • Supports required – provided by an additional internal structure

  • about 150g/Shifter

Required parts:

Happy printing – feedback and makes are always welcome! 🚴


Du willst auf deinem Indoor-Bike das echte SRAM-AXS-Feeling, ohne die teuren Originale zu verbauen? Dann ist dieses Modell genau das Richtige!

Ich habe das Innenleben meiner originalen SRAM FORCE AXS E1 Shifter eingescannt und daraus einen Dummy nachgebaut, der die Kontur der Original-Shifter nachbildet. Kombiniert mit den originalen SRAM-Gummihüllen (separat erhältlich, SRAM Griffgummi Überzug | Hoods für Schalt- | Bremshebel RED AXS E1 ) fühlen sich die Teile am Bike an wie das Original – nur ohne die teure Elektronik innen.

Besonderheit: Die Bremshebel sind so modifiziert, dass sie die Zwift Click Mounts direkt aufnehmen. Somit hast du Shift-Paddles im AXS-Look mit voller Zwift-Steuerung.

Druckempfehlung:

  • Material: PLA

  • 0,2 mm Schichthöhe, 7 Wandlinien

  • 35% Infill

  • Support notwendig inkl. zusätzliche Innere Struktur

  • ca. 150g pro Shifter

Benötigte Teile:

Viel Spaß beim Drucken – Feedback und Makes freuen mich! 🚴

Tagi