RC Drift wheels 57mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple drift tires (with rims) that are particularly suitable for indoor driving. The weels fit standart 12mm hex.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Yes, they work, but since they are 3D prints, please be aware of the quality. In image 5, you can see what happens when you drive it over asphalt using a 3S LiPo battery (I had already drained two 2S batteries before that), but i think for indoor use they will work (longer).
Now that we’ve cleared that up, let’s move on to printing and assembly.
Just print the tire(s) with TPU(i used 95A) and the rim(s) with PETG or ABS. After printing, you can fit the parts together and glue them.
That’s about it—have fun if you try out the experiment.
Note: Please bear in mind that these wheels, with an overall diameter of 57 mm, are better suited for smaller models.
if you like the design check out my other models
This text has been machine translated