Mini Hygrometer Insert (Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,18 € – 0,22 € netto (bez VAT)
Dla pliku: mini hygrometer insert_0.4n_0.2mm_PLA_COREONEL_11m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,20 € netto (środek widełek).
- Masa podana przez autora
- 3 g
- Czas druku podany przez autora
- 10,8 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Add a hygrometer to your homemade dry box and easily replace it.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mini Hygrometer Insert
Add a hygrometer to your homemade dry box and easily replace it if it gets damaged.
Hardware
The hygrometers I used, and they are the only ones I've tested with https://www.amazon.com/Hygrometer-Humidity-Thermometer-Fahrenheit-Thermostat/dp/B0CXHS6CYS
Use the cutout template to cut a hole into your drybox lid, or wall and then secure the insert in place. I used superglue for this.
Print Settings
PLA
0.20mm layer height
No supports
15% infill
Photos printed with Prusament Galaxy Black