1 / 4
ABUS 180IB/50 Padlock Weatherproof Cover — zdjęcie 1
1 / 4

ABUS 180IB/50 Padlock Weatherproof Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Weatherproof TPU cover for ABUS 180IB/50 padlocks that are kept on moving vehicles and are exposed to dirt and debris.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

These brass bodied ABUS padlocks are great for outdoor use without corroding but on a vehicle they get water, dirt and dust into the code wheels and they become very hard to use. 

This cover fully protects the lock from debris so it works when you need to open it for the first time in three years on the side of the road or on a trail. I have spent more time dealing with a frozen lock to get to a spare tire than the rest of the tire change took.

All three parts nest into each other in a cascade from top to bottom so water running over the lock cannot get in. For lighter duty applications where moisture is not a concern, just the code wheels cover alone can be used to shield from debris.

  • Several of the thin parts are multiples of 0.16mm, using that layer height will yield the best results. 

  • Designed to be printed in TPU, other materials have not been tested. TPU has the added benefit of preventing the lock body from damaging anything it knocks into or making noise.

  • The lock body sleeve prints best with supports, the print profile is tuned to separate very easily.

Tagi