1 / 2
Blurolls (Un)original Prusa Drybox filament spool assembly retainers — zdjęcie 1
1 / 2

Blurolls (Un)original Prusa Drybox filament spool assembly retainers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Retainers that hold the aluminium tubes of the drybox filament spool assembly in place when you open your enclosure lid

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I use a hinged lid on my MK4S, which has the BluRolls (Un)original Prusa Drybox mounted to it.
I found when opening the lid, the filament spool assembly would tip backwards.
These retainers pick up the screwholes of the Drybox frame and with 5mm longer screws, mount in place to hold the aluminium tubes in place.
Only tested on 18mm tubes.

Tagi