1 / 7
Shelf Bracket For Catio - Kennel — zdjęcie 1
1 / 7

Shelf Bracket For Catio - Kennel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I got an outdoor dog kennel on Amazon and converted to a catio. I put up shelves using these brackets and deck boards.

Ocena
0 / 5
Polubienia
4
Pobrania
7
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I got an outdoor kennel on Amazon and converted to a catio. I put up shelves using these brackets and deck boards that are 5.5" wide.

I printed mine out of PETG.

They just hook on the horizontal wires of the kennel.  The bottom of the bracket can be secured using a cable tie. Put a little bend on the end of the cable tie and it should follow around.

Here is the kennel I have.  There are many similar ones that are likely the same. 

https://www.amazon.com/dp/B0BZJ44LR4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1

The important details to look for to make sure these brackets will fit:

  • 100mm (~just under4") center to center between horizontal wires of cage

  • Wire diameter ~3mm or just under 1/8"

Best to mount these as close to the tube posts as possible so the shelves are stable.  If mounted too far out, then the wire mesh of the kennel will flex more and the shelves will be less stable. 

Tagi