Shelf Bracket For Catio - Kennel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I got an outdoor dog kennel on Amazon and converted to a catio. I put up shelves using these brackets and deck boards.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 7
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I got an outdoor kennel on Amazon and converted to a catio. I put up shelves using these brackets and deck boards that are 5.5" wide.
I printed mine out of PETG.
They just hook on the horizontal wires of the kennel. The bottom of the bracket can be secured using a cable tie. Put a little bend on the end of the cable tie and it should follow around.
Here is the kennel I have. There are many similar ones that are likely the same.
https://www.amazon.com/dp/B0BZJ44LR4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1
The important details to look for to make sure these brackets will fit:
100mm (~just under4") center to center between horizontal wires of cage
Wire diameter ~3mm or just under 1/8"
Best to mount these as close to the tube posts as possible so the shelves are stable. If mounted too far out, then the wire mesh of the kennel will flex more and the shelves will be less stable.