1 / 3
Louder ESP32 slim case — zdjęcie 1
1 / 3

Louder ESP32 slim case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case for Louder ESP32 from Sonocotta

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
78
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of mistic100's low profile case for a Louder ESP32 from Sonocotta.

To assemble, use 3 M3 screws. I found that M3x16 worked best but 18 or 20 also worked. Pre-tap holes.

Changes:

  • Increased hole size for the USB-C

  • Added polarity signs

  • Added screw holes

Tagi