Dishonored logo 3D printable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is fully printable logo from one of my favourite games: Dishonored. Enjoy!Scale it as you want in your slicer…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
This is fully printable logo from one of my favourite games: Dishonored. Enjoy!
Scale it as you want in your slicer program like you want, but "z" axis must be always scaled to 100%.
This logo is two-color logo so you can change filament color on a correct layer height and you don't have to use glue.
Print Settings
Printer:
Anet A6 (a bit modified)
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
100%
Post-Printing
When print done and hotbed is cold, stick a piece of tape.
Then use some sharp tool to detach the letters.
After that mix some two component adhesive. I don't recomendet using cyanoacrylate glue because it leaves some white mark.
And here it is, your Dishonored logo.
How I Designed This
I converted this logo to a .svg format using this site: https://convertio.co/pl/image-converter/ Edit: Now I am using Inkscape to convert image to .png it is much better.
Then i import it into Fusion 360
Category: Signs & Logos