Dishonored logo 3D printable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is fully printable logo from one of my favourite games: Dishonored. Enjoy!Scale it as you want in your slicer…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
This is fully printable logo from one of my favourite games: Dishonored. Enjoy!
Scale it as you want in your slicer program like you want, but "z" axis must be always scaled to 100%.
This logo is two-color logo so you can change filament color on a correct layer height and you don't have to use glue.
Print Settings
Printer:
Anet A6 (a bit modified)
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
100%
Post-Printing
When print done and hotbed is cold, stick a piece of tape.
Then use some sharp tool to detach the letters.
After that mix some two component adhesive. I don't recomendet using cyanoacrylate glue because it leaves some white mark.
And here it is, your Dishonored logo.
How I Designed This
I converted this logo to a .svg format using this site: https://convertio.co/pl/image-converter/ Edit: Now I am using Inkscape to convert image to .png it is much better.
Then i import it into Fusion 360
Category: Signs & Logos