Heltec V4 with 3000mAh Battery Screwless Case [No GPS, No Logo, No Words, Compact, Improved Latching]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case is for the Heltec V4 LoRa radio. It is designed to be compact. It does not have space for a GPS module.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
IMPORTANT: When removing the housing from the build plate, lift it from the opposite side of the buttons so they do not stay attached to the plate and bend outward.
I learned to cad because 99% of the cases you can find have a major flaw, especially the screwless ones. This one suits my needs. Not fancy, just works.
This print is forgiving with the settings. Set infill to 0%. No supports. No screws required. Designed specifically for the Meshnology 3000mAh Lithium Rechargeable Battery: https://a.co/d/09bB6Bfe.
I did not include branding/words because they are an annoyance and no one cares.
[UPDATED] The lid has been redesigned to lock much better than the old friction fit. Added a cutout for the SMA nut to fit so the antenna can be tightened without spinning. The fit is tight but once you put the nut on the SMA and tighten it will lock into place and pull the SMA up into the socket.