Liczymy pasujące modele…
A form-fitting snap together case for the Heltec v3 meshtastic radio with OLED display that fits a makerfocus 3000mAh battery nicely. It's a close fit, so take your time putting it together. I tried to adjust some tolerances to make it a…
This is a case for the Wio Tracker L1 from Seeed Studio which can fit the Meshnology 3000mah 755060 battery. Makes a good standalone Meshtastic device with the new firmware which has the virtual keyboard. Update 6/12/2026: Added step…
An awesome case for Heltec LoRa 32 V3 originally made by Alley Cat This is a remix version of mine for a larger battery (58.6mm x 39.8mm x 9.3mm), note that the accessories from the original creator will not fit. There is another remix…
This is a case for the Heltec T114 v2 with MakerFocus 3000mAh battery. Designed for the use as a Meshtastic or Meshcore node. Before you start: This model has very small tolerances - Accurate printing required. If you are unsure, scale it…
I wanted a Heltec T114 V2 meshtastic radio case that would fit with the GPS module. I didn't see any. I also wanted one that would hold two of the larger 3000mAh Lipo batteries. I made it to snap together so no hardware would be required.…
Modified the great case designed by zeropt to fit a 3000mAh Makerfocus battery (65x35x10mm). A M3x14mm screw is needed. I had no Onshape experience and I needed some time to figure it out and to appreciate the great design of zeropt.
Upgraded SEEED Wio Tracker L1 E-ink made space for the maker focus 3000mah battery, and case made more compact, upgraded buttons, added a hook to the top, added supports to hold the screen. just a basic case note: its a different size…
I designed this as a flat Meshtastic node that is flat, but still fits a 3000mah battery. Style inspired by TonyG. Print: 1 Body 2 Cover EXTRA HARDWARE NEEDED: 4x M3x18 bolt & nut to sandwich assembly together 3x M2x4 bolt & nut to attach…
UPDATE 2: I am selling the 5000mAh version with USB-C charging, and Callsign customization in my ETSY shop: https://k1tdgtech.etsy.com UPDATE1 : I just uploaded a new version of the 5000mAh case that will allow the radio to stand at a…
Heltec V3 with 3000mAh battery just made longer to fit the battery. literally just cut the center portion out and copied it two times to make it long enough to fit the 3000mAh battery. Also, I had to make the screw holes bigger to…
This is a case for the Wio Tracker L1 from Seeed Studio which can fit a 3000mah LiPo battery with the measurings 67.5 x 36 x 10,2 mm. Makes a good standalone Meshtastic device with the new firmware which has the virtual keyboard. Model…
V1 case for Heltec V4 with a 3000mAh battery. Features a side-mounted antenna so you can charge the device with the antenna standing upright.
Upgraded the case to be less flimsy, overall the case is significantly less flexible without the top on, when the top is on it no longer flexes down when pressed., maker focus 3000mah battery fits snug Uses the same top and buttons as the…
Description Table of Contents Model overview Parts used Printing Assembly This is a case for the Wio Tracker L1 from Seeed Studio which can fit a 3000mah LiPo battery with the measuring 67.5 x 36 x 10,2 mm. Makes a good standalone…
V2 update : bottom intergrated with the case housing, Reset use a pin instead of a bottom, added board clip (extra clip not needed anymore), extra space for battery cable, just download v2 files. Designed for Heltec WiFi LoRa 32 (V4) with…
I remixed this to get a bigger battery inside (the one I had in store) The case is super simple and compact. Use the original case lid. Than you @dreimal_8
I liked HD_Creator's concept but didn't like the top cover and the button design. It was too small for my batteries, so I redesigned it from scratch. Board is now secured into place by the walls behind it, and buttons are standalone.…
A small case for the Heltec Tracker with space for a 3000mah battery. The antenna is aligned so that it does not interfe
Rotate models to point upwards. Case back should be on the bed, Front of case should face up. Use supports for the front of the case I used organic supports on the case back to support the overhangs on the outside of the case, as well as…
CASE Heltec V3 com bateria 103665 3000mAh com clip para conto e alças para pendurar.
IMPORTANT: When removing the housing from the build plate, lift it from the opposite side of the buttons so they do not stay attached to the plate and bend outward. I learned to cad because 99% of the cases you can find have a major flaw,…
Original Seeed case modified to house a 3000mAh 103665 cell in place of the 2000mAh 103450. Modifications included extending the battery compartment by 5mm on the back, allowing it to be used with the original front, but I also smoothed…
RUIZHI ESP32 V3 LoRa Board voor Meshtastic, ESP32 LoRa V3 modules met 868MHz antenne en 3000mAh batterij met 0,96 inch OLED-display integratie WiFi Bluetooth 1262 compatibel met Meshtastic IoT Arduino : Amazon.nl : Zakelijk, industrie &…
(new better version i made) https://www.printables.com/model/1384022-seeed-wio-tracker-l1-e-ink-reference-case-made-usa i crudely extended the seeed studio case to fit the makerfocus 3000mah battery, use the front pannel from the orginal
Sized for a 3000mAh Battery and used double-sided tape to secure the holder
32.3% (repeating, of course) MORE POWER! This is a customized version of the Darknet-NG 13 badge model with a jumbo sized battery compartment to accommodate a 3000mAh battery (reference design uses a 2000mAh battery). I upsized the main…
Removed the reset button and left a pinhole for flashing. Heat inset version.
3 Cases for Meshtastic or Meshcore Node Based on Heltec v3 with up to a 3000mah battery. Created for the Heltec V3 LoRa 32. Extra hardware required: 4 x M3x6mm (6mm minimum). Heltec V3 LoRa 32 This set of cases should be easy to print on…
Print the top and bottom parts, use M4 screws to screws the battery holder shut. Then, screws the holder into another part using the side holes with areas to put nuts.
Remix of H2T 103665 battery model to fit the makerfocus 3000mah battery
This is a remix of the Wio Tracker L1 E-Ink enclosure with a few changes focused on screen protection and personal customization. The original case design fit together really well, but the 2.13" ePaper display felt a little too exposed…
Modded HarukiToreda's T114 bottom base case to support the common 3000mah cell that can be found on Amazon: https://a.co/d/0e1LnWfm
3D Step model of above 18650 LiIon Battery Cell
Protective cover to prevent the switch on your TalentCell 3000mAh from getting flipped in your bag. PETG recommended.
Everyone has a first original 3D model that they will someday be embarrassed by in the future, but you have to start somewhere, right? This one is mine. I printed an enclosure from Frey that supports a 3000mAh battery (which is itself a…
Heltec V3 Enclosure with Countersunk Holes and Light Pipes This is a remix of BertoTuxedo's Heltec V3 enclosure , which is itself based on the original design by Michal . Huge credit to both designers for the excellent enclosure and for…
A remix of the RAK19003 case originally designed by N7TRX , adapted to fit a 3000mAh LiPo battery (size 974958) . Notes: Ultra-compact: Space inside is tight, so take care when routing your cables. Snap-fit: At 100% scale, the shell snaps…
Description Table of Contents Model overview Parts used Printing Assembly This is a case for the Wio Tracker L1 from Seeed Studio which can fit a 3000mah LiPo battery with the measuring 67.5 x 36 x 10,2 mm. Makes a good standalone…
Sized for a 3000mAh Battery and used double-sided tape to secure the holder
I remixed this to get a bigger battery inside (the one I had in store) The case is super simple and compact. Use the original case lid. Than you @dreimal_8
Modded HarukiToreda's T114 bottom base case to support the common 3000mah cell that can be found on Amazon: https://a.co/d/0e1LnWfm
Original Seeed case modified to house a 3000mAh 103665 cell in place of the 2000mAh 103450. Modifications included extending the battery compartment by 5mm on the back, allowing it to be used with the original front, but I also smoothed…
This case was made with the purpose to be as slim as possible and to house a Heltec V4 and 3000mAh battery while fitting into a pocket. Following parts are needed: - 1x Heltec V4 board with antenna (See link below). - 1x 3000 mAh LiPo…
![Heltec V4 with 3000mAh Battery Screwless Case [No GPS, No Logo, No Words, Compact, Improved Latching]](https://media.printables.com/media/prints/68b86542-b93d-4e47-861a-ccb8cb1b0abb/images/13695390_72662b35-633c-434b-9407-75c2711453a7_39724ef2-db08-4a5e-aeac-ad6f35c9f5ab/cover-photo.png)
