1 / 4
Miniature monitor VESA mount — zdjęcie 1
1 / 4

Miniature monitor VESA mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple articulating mount for miniature LCD monitors or other VESA 100/75 accessories

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
74
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

I needed a nice, simple articulating, non-rotating mount for a 9.7" LCD monitor I had, and wasn't quite happy with what was available so decided to design my own. 

Construction is very straightforward, the actual pivot mounts are a standard M4x35mm bolt, and a standard M4 nut or nylock nut. I like nylock nuts as you can tighten them and they tend to stay tight with less fuss. Two strut lengths are provided- both 100mm and 150mm pivot spacing to accomodate different gear or use cases.

The actual VESA mount itself is a standard 100mm x 100mm spacing, and designed to accommodate up to an M4 socket or cap headed bolt to mount the monitor. I have also included a 75x75mm version as well.

There are three 4mm holes in the feet to accommodate heat set inserts or rubber nubs. I don't use them but they're there if you want them. 

I don't mind if you use this commercially as long as you share a link to the original in your project, and are transparent with the source.

Monitor in example pictures is not included, but will eventually be uploaded as a separate project.

Tagi