Ender 3 S1 Modder Board V2 Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective cover for the Ender 3S1 V2 Modder board from Nathan Builds Robots (NBR).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a Nathan Builds Robots Sprite Modder Board V2 Cover to protect the exposed board once installed along with an optional filament guide (dovetailed in).
Only cover I could find (even from NBR) was for the V1 board which did not fit the V2 board so I made it myself.
I took the opportunity to use the two top bolts of the board to hold the cover in place and take up the extra bolt length that the old main plug brace used to take up.
During the installation you will need to remove the two white terminal covers at the ends of the board (Thermistor and Hotend fan 2). You can pull these out and push them back on once you have passed them during the installation.
As I have a dual parts fans I added space under the cover to hold the extra wiring within it (cleaning up my setup) and included a small opening on the side opposite of the filament release handle to help pass the cables through. The main plug helps keep the cables tucked in nicely.
As my fans now block my view of my extruder's filament port, I added an extended guide to remove the guess work when installing filament. This guide is a separate piece dovetailed with a dovetail making it easier to print the parts and allows you to choose if you wish to use it or give you flexibility if you wish to make them different colors.