Latte Panda Alpha CyberDeck Case WIP V2.0 (9/22/2026)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My first version of a cyberdeck. Designed to be modular and adaptive. Project Nomad inspired. Work In Progress
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
So I have been planning a modular cyberdeck for a while. I wanted to be useful in many different applications from a portable tablet PC to a larger off grid personal database like the newer Project Nomad. Maybe someone else can find this useful as I plan to keep updating and building my setup here.
Ver 1.0 One frame has hexes to glue in 3mm nuts the other is sized for 3mm heat inserts. The back case is designed to have an integrated Wi-Fi antenna that will function as a kickstand. The first version can be used with M3 x 12 for the frame only build and M3 x 20 if the back plate is used.
Ver 1.1 Back Plate - thickened walls, added heat insert holes to attach bezel cap, thickened power button due to breakage. Frame - Removed cross brace due to interference with eDP ribbon cables, added holes for bolts to passthrough. Bezel Cap - New part to help with protection and rigidity. Went with all 3mm heat inserts that are 6mm deep. M3 x 20 cap bolts (qty 4) for the back plate mounting. M3 x 10 cap bolts(qty 14) for the bezel cap mounting.
V1.1 Assembly
place LPA into back plate and orient wiring (Wi-Fi and Bluetooth antennas, etc.)
place frame over LPA and into the back plate
install screen ribbon cables
install screen
place bezel over screen and secure with M3 x 10 bolts (qty 14)
turn unit over and secure back plate to frame with M3 x 20 bolts (qty 4)
Ver 2.0 Completely redesigned. LPA moved higher and Case extended downward giving room for a battery setup to be included. Wi-Fi antenna mounting moved to be above the case and power button more accessible. Included holes for 3mm heat inserts around the body to allow modularity. Spacing for holes are 25mm or 50mm around and the double holes are 15mm. All holes measured center-to-center. May upload back case without holes later. Will upload progress photos soonish.
Ver 2.1 Added speaker horns internally that will fit 40mm diameter 5mm thick speakers. Horns have covers to allow the speakers to move sound out through the bezel. Will require amp board suitable to your speakers.