Punisher Skateboard Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from an already great design by fessyfoo. For a clean look I didn't put any screw holes in the Punisher's…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 178
- Wydruki
- 2
- Wyświetlenia
- 741
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Remixed from an already great design by fessyfoo.
For a clean look I didn't put any screw holes in the Punisher's head. So if needed, a small amount of 3m outdoor tape would keep the top part flat and flush with the wall. This design is fresh off the printer and I haven't mounted or tested it any way. If you decide to download and use it please feel free to leave any comments or insights to better
this design and or print.
Please note: This is a large print and measures about 8.5" x 5".
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
25%
Category: Hobby