1 / 2
Removable Beginner car sign/plate 100 mm (Začátečník) — zdjęcie 1
1 / 2

Removable Beginner car sign/plate 100 mm (Začátečník)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you are a beginner you and if you dont have your own car you might need this plate...

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Open Community License v1.1 + General Attribution v1

You will need 4 suction cups. I used four from my screwdriver set.

The hole diameter in the suction cups is 4 mm, and the diameter of cylinder pf the suction cup section is 8 mm. Since it uses a simple stepped design, you can easily modify the dimensions to fit different suction cups.

It should hold up well, but I still recommend placing it under the windshield wiper for extra security.

You will also need to buy the sticker separately. Make sure the colours match the legal requirements so you don’t run into any problems.

Print settings:

  • No supports

  • ABS or ASA (It will be under sunlight)

  • 0.20 layer hight

(print the sticks like showed in the picture + brim)

Tagi