1 / 2
Removable Beginner car sign/plate 100 mm (Začátečník) — image 1
1 / 2

Removable Beginner car sign/plate 100 mm (Začátečník)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

If you are a beginner you and if you dont have your own car you might need this plate...

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Open Community License v1.1 + General Attribution v1

You will need 4 suction cups. I used four from my screwdriver set.

The hole diameter in the suction cups is 4 mm, and the diameter of cylinder pf the suction cup section is 8 mm. Since it uses a simple stepped design, you can easily modify the dimensions to fit different suction cups.

It should hold up well, but I still recommend placing it under the windshield wiper for extra security.

You will also need to buy the sticker separately. Make sure the colours match the legal requirements so you don’t run into any problems.

Print settings:

  • No supports

  • ABS or ASA (It will be under sunlight)

  • 0.20 layer hight

(print the sticks like showed in the picture + brim)

Tags