Bleed Funnel Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bench top stand to keep your bleed funnels from falling over from the unstable OEM stand
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This stand will hold two Shimano funnels of your choice. With the legs this long, the new funnels with black rim will stand out about 1,5cm/1/2" over the "table top" in the mount. You can shorten those to your liking in the slicer.
I used PLA for quick printing and to be able to super glue them together. Its not bearing any real load so settings can be as stable or as light as you want or will print.
Edits:
2026-08-31: added photo of V1 (not the model uploaded). The diameter at the base is a bit too small and the hole is not quite deep enough. So the funnels sit weird and if you cut them to sit better the threads of the flatbar version hit the bottom. The uploaded version fixes that. Will add a picture once I print Version 2. Text was added in slicer and printed with an XL.