1 / 3
VIDEX VLF-H025C Headlight Bike Seatpost & Handlebar Mount — zdjęcie 1
1 / 3

VIDEX VLF-H025C Headlight Bike Seatpost & Handlebar Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Seatpost & handlebar clamp mount for VIDEX VLF-H025C headlamp to use as a red tail light or front light.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A sturdy two-piece bicycle mount designed specifically for the VIDEX VLF-H025C (310Lm 5000K) LED headlamp.

It allows you to securely attach the flashlight to your seatpost (to utilize its red light mode as a safety tail light) or to the handlebars for front illumination. The design clamps firmly around the tube while locking the headlamp bracket in place.

Hardware Required:

  • 2× M4 bolts + nuts (for mounting the faceplate/headlamp plate)

  • 1× M5 bolt + nut (for the seatpost clamp mechanism)

Print Settings & Orientation:

  • Material: PETG or ABS/ASA recommended for outdoor durability and UV/weather resistance (PLA works, but may soften under direct summer sun).

  • Layer Height: 0.20 mm

  • Infill: 25–40% (Grid or Gyroid) for mechanical strength

  • Perimeters/Walls: 3–4 walls for solid screw clamping

  • Supports: Tree/Organic supports recommended

  • Orientation: Print the main clamp body at an angle resting on the clamp base for optimal layer line strength against clamping forces. The front plate prints flat on the bed without supports.

Tagi