Ford Transit Roof Vent Adapter 14x14
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts 14"x14" RV roof vents to the Ford Transit roof, which has curves.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Original model's parts would barely fit my SOVOL SV06-Plus and always warped no matter what I did, so I rebuilt the model and broke it into "corners" that fit my Flashforge AD5X, with small "keys" to ease assembly and give more gluing surface.
Print two of each corner and two of each key, dry fit and sand/file to minimize gaps before gluing together with whatever's appropriate for your chosen filament. I used ASA-CF and solvent welded with acetone which would also work for ABS. PETG would need something else, nylons need something else, do not use PLA because the roof gets HOT in the sunlight and will deform the plastic. Use appropriate adhesives and sealants when installing to the roof of your van because you do not want this to leak in the rain. I used Sikaflex 221 because I still had some from another project, but do your due diligence and make your own informed decisions on those products.
This should be obvious but I'll say it anyway: PRINT WITH THE FLAT SIDE TO THE BED
No actual photos because the end result is the same as the original model I remixed this from, and it's a strictly functional part that noone will see.