Ring Doorbell Battery 2K 30° Angle Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to angle the Ring Doorbell Battery 2K inwards by 30°.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Open Community License v1.1
Ring Doorbell Battery 2K Angled Bracket
A bracket to angle the Ring Doorbell Battery 2K inwards by 30°.
Modelled upright in TinkerCAD but should be printed on it's "back" (the flat side with no indents).
Smooth PEI or textured plate. Printed in PETG to deal with the temperature differences outside.
No supports required.
Features:
Indent to attach the Ring removable bracket to, including screw holes perpendicular to the bracket
Larger screw holes to attach the bracket to the doorframe, perpendicular to the back.
Large hole in the middle to feed USB-C or doorbell wiring to the Ring
Designed originally to attach the doorbell on left hand side of the door (pointing inwards), but changed my mind so simply mirror flipped it and printed again for the right hand side.
Did try and build a little roof for it but it didn't look right so ended up not using it. Feel free to improve if you want it.