Capacitor dummy shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a capacitor shell used in recapping large old electrolytics as commonly found in 1970's era vintage audio…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — NoDerivatives
This is a capacitor shell used in recapping large old electrolytics as commonly found in 1970's era vintage audio gear.
It can house a modern 8400uf 35v, 18mm diameter by 40mm tall electrolytic capacitor, replacing a 40mm diameter by ~70mm tall 8200uF 35v capacitor with screw terminals on the top.
I just used roughly 3.4mm computer case screws for the screw mount. I reccomend the v2 as it is textured a bit better and has teeth on the top as opposed to the v1 which was my first attempt and a little plain. The v1 lacked screw holes wich made getting the leads up from within the cavity quite a pain
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2mm
Infill:
30% min recommended
Category: Replacement Parts