Liczymy pasujące modele…
This is my version of the Flux Capacitor from the movie "Back to the Future" Resized to fit my print bed. Controlled with an attiny85 and NeoPixels Print instructions Printed in PLA, no supports needed. The "Crystals" are printed with a…
Whoa, Doc. This is heavy. The relay bodies and caps were remixed from myyellowminicooper's designs here: https://www.thingiverse.com/thing:4303759 Thanks to myyellowminicooper! Those designs were a great starting point for me. I made…
Here it is ! The flux capacitor from back to the Future (more square). It's an alarm clock and once the alarm goes off, it randomly plays sounds from the BTTF soundtrack. I provide everything to make it. How to use: Setup/Stop button: Set…
This can be completely 3D printed, but have some optional modifications for more realism. You can wire up your own lights and electronics, but I provided a design for a speed controlled PCB. 3D model preview Filament Colors: Grey, Black,…
Not my design. Needed to download unnecessary programs just trying to simplify this for someone else who needs it.
Turn your MK3 into a Time Travel Machine with the Prusa MK3 Flux Capacitor, it can also be used as a rotation indicator. Print individual parts then super glue together, kind of a pain, but time travel isn't easy. Glue a 8mm (.315)…
This is a simple variable capacitor. the main idea was to make it extremely easy to print and not require to cut metal plates. i was inspired by another very clever design that use a rotating cylinder. this has a gap of around 10mm…
If you like this design please consider buying a coffee for me. Lol. Thanks https://buymeacoff.ee/ta2wk ------------------------------------------------------------------------------------------------------------- Bearing version…
FIVE33 Switchback - TPU capacitor holder 470 uF / 50V
Knob for Variable Capacitor - Drehkopf für Drehkondensator → width / Weite = 44/27.5 → height / Höhe = 19/17 → 0.4 Nozzle → 0.2mm Layer Height → 30% infill → PLA → cap → TPU → no support
Adapters to hold a 50mm diameter capacitor in a 63mm strap and a 52mm diameter capacitor in a 65mm strap. A recent repair of my HVAC system required replacement of the start and run capacitors. Although I bought replacements with the same…
TBS Source One v5 Capacitor Mount made out of TPU
use a zip tie and some dabs of glue to lock in place. tabs on mount key into frame.
Needed a frame to hold a 5 Farad capacitor for a car audio setup. Whipped this up quick. 85mm diameter. I am brand brand BRAND new to the cad stuff and self taught so dont expect something mind blowing. First post!
Wanted a simple and secure way to mount a 1000μF 35v cap to the back of the Switchback, this one is modeled for a Rubycon capacitor of that spec, but should fit similar ones. Capacitor snaps in with the groove held in place.
Customize in Openscad or similar. Print 2 and use E6000 glue to secure a capacitor to the rear standoffs of a 5 inch racing drone. Be sure to cover any exposed terminals; I like tape and heatshrink. The provided stl is for 10mm wide…
Warning this project is Under Development, im waiting for parts to arrive!! The Dymo LabelManager PnP is a great USB printer with one issue, It KILLS its batteries. I'm not sure of the root cause of this though, it delivers 8.3V that…
Housing for 1.6F capacitor bank (often advertised as 2F, 2.2F) up to 16V. Very basic design but it keeps stuff from touching the live parts (low voltage, but high energy). Inner dimensions are roughly 65 x 30 x 15 mm, if you want to use…
Fits both front standoffs and adjusts perfectly behind the front TPU. The button on the side is ideally positioned for the Vifly Finder 2 Buzzer. Choose between 12.5 or 10 mm as the capacitor diameter size.
Redukce pro kondenzator 36mm na držák se závitem M18x1,5 Kondenzátor přilepit lepidlem/silikonem .
SMD Electrolytic Capacitor Toilet Paper Dispenser with Twist Lock and Magnet I work with electronics and use toilet paper daily to clean soldering flux and thermal paste. A roll of toilet paper on the bench, however, looks quite bad and…
If your electronics project contains large capacitors they might be the only element that has uninsulated terminals that are easily touchable when servicing. This cap give the terminals some protection that is not an unsightly and…
I recently upgraded my ZD-915 de-soldering station. The little DC-DC converter PCB was left over. Instead of sending it to recycling, I soldered on 2 more resistors and modeled this little part so I can safely use it to drain capacitors…
A simple side mount for a Panasonic EEU-FR1H102 (1000 µF 50V ⌀16 mm/26+ mm) capacitor (27mm long; 16mm diag.). Print with TPU.
Do you wonder what to put in the cubby of your Maverick like I used to? Why not a flux capacitor? Unlike Doc Brown's, this does not require plutonium, a lightening strike, fusion, or an exploding locomotive. It just needs three double…
I made this to move large snap in capacitors that need to be lifted off the board, specifically for the JJP power board. This is made for a 35mm diameter capacitor with 10mm leads spacing. Holes are larger than necessary to allow…
This is a case for the Sainsmart Huhushop Mega328 Tester/Meter. This case also contains a battery compartment and sliding panel for access to change the battery. The tester itself will automatically determine the component attached to it…
I really liked mhoyt idea of transforming the extruder into a Flux Capacitor but I wanted to make an MMU version of it. For people that don't have an MMU, you should check out the original design (…
These models are 3D printed capacitors! What are they good for? Good question. It was just an experiment but might be an interesting STEM or introductory physics class project. Let’s take a look the design. They are printed using two…
Remade these in Fusion360. Decided to modify the center mount to a hex hole and is underside for a very tight fit to prevent rotation and sipping up or down. Part is meant to be printed in TPU 100% infil. Category: R/C Vehicles
The 16V capacitor blew on my Mana SE board so I needed a replacement. (Never move the stepper motors when they are unpowered and attached to the board..) Hardware store only had tall ones and because of that the top plate didn't fit…
Thank you very much @Jejelinge_724355 for your hard work and sharing. I look forward to getting into one of these other projects. It is thanks to people like him that I have been able to learn new things.
Holder for two capacitors (51mm diameter) 5mm machine screw with countersink head, see picture. The holes in the ends are for a piece of Filament to align the ends.
Holder for Capacitors, 6mm Standoff, 10mm Capacitors, e.g. 470uF 35V Category: R/C Vehicles
A small mount to fix a capacitor between two standoffs.
Carrying case for the flux capacitor with stubby antenna
After crushing my Cap I designed this to be able to mount it to one of stand offs I have a 35v 470uF cap. 3mf flies uploaded so you can make adjustments if you want.
Housing made for 47000UF 25V capacitor from Ali Express. Good for switching between batteries in flight. https://nl.aliexpress.com/item/1005006587174329.html?spm=a2g0o.order_list.order_list_main.35.4ece79d2bZr6qS&gatewayAdapt=glo2nld
Fits Vifly Finder 2 Fits Capacitors ⌀12mm±0.2mm; max length 31mm Probably fits the Syncmode as well. Just mind the camera angle.
The original capacitor mount on the Mario 5 (slung under the flight stack) does not fit a Panasonic LM and is prone to causing the capacitor leads to short out against the carbon midplate. This model will sit at the front of the drone…
If you like this design please consider buying a coffee for me. Lol. Thanks https://buymeacoff.ee/ta2wk ------------------------------------------------------------------------------------------------------------- For Nema 17 type Stepper…
Minimalistic standoff capacitor holder for the JeNo-7 frame. Mount supports 35v 1000uF 10mm diameter Low ESR capacitors, e.g.: https://a.co/d/38D8h6h
Housing for 1.6F capacitor bank (often advertised as 2F, 2.2F) up to 16V. Very basic design but it keeps stuff from touching the live parts (low voltage, but high energy). Inner dimensions are roughly 65 x 30 x 15 mm, if you want to use…
Hey there, I just took the time to make this remix in which you can just select the colors and print the 2 files with your MMU printer, no glue needed to assembly the pieces. -remember to use supports.
Print in TPU, Some tolerance in capacitor slot to use with heat shrink tube
A very simple model to mount a capacitor in a RC car. In this case, I designed the holder to fit a 10 mm capacitor in a Tamiya TT-01E. The base plate of the holder simplifies the usage of double-sided tape. The pictures shows two models,…
Hello all, This is a design that is made to work with the Eaglemoss Back to the Future 1:8th scale DeLorean. I designed it around the electronic flux board that can be ordered from Modelmodz.com. To print this properly, your printer must…
Clutch for coupling the stepping motor shaft with the butterfly capacitor rotor.
This is a capacitor mount by MirellaFPV that also has a spot to mount your rx. Works great
Stock is too small for a 12,5mm capacitor with 35V 1000uF. I cant draw in cad but i added modifiers to fill holes and make new, cut away little so I could fit a 50V 1000uF instead.
🚀 Flusso Canalizzatore – Il cuore della macchina del tempo! ⚡ Hai sempre sognato di viaggiare nel tempo? Con questo modello 3D in scala 1:2 del leggendario Flusso Canalizzatore , ispirato alla mitica DeLorean DMC-12 di Doc Brown , potrai…
I created a full E12 series of resistor labels for the 1x1x1 box and drawer with 3 comapartment. In future i will add more label for extending some values from E24 series and also add labels for small capacitors. I did a manual filament…
Learning to model - scale model of a supercapacitor bus bar for my hybrid starter battery project.
Yes, I know – these days everyone already owns one or more flashlights. But this little flashlight is a little different. It requires no batteries, rechargeable batteries, or charger, making it ALWAYS ready for use. By simply turning the…
Just a simple enclosure with holes for easy mounting. Print with something heat resistant, these can get hot when they are discharging batteries. Honeycomb pattern for ventilation and LEDs.
Made window cutouts for LED's because i literally do not have any translucent filament and wanted to see the LED's. Its a shame to cover this kickass board, but it does help protect it. It also has the name ( FluxCapacitor ) on the top…
I needed a way to stack three 5.5v 1f capacitors to make a sort of “battery” for a new flying project ( Coming Soon!!! ) so I modeled something really quickly printed it and glued the capacitors in it and then soldered the corresponding…
universal mount for fettec absorber and the 50V capacitor for use with cable ties https://fettec.net/shop/fettec-spike-absorber https://fettec.net/shop/kondensator printed in tpu 0.2 layer without supports I would be happy if you leave a…
Nice little cap holder, super light coming in at .8g with my tpu, super light compared to what I could find out there. I like to use a tiny bit of heatshrink to keep the leads semi isolated, and it works good. print at 100% infill, 0.4mm…
Simple capacitor holder for Flyfish Volador 3.5 and rotated FC, where power wires are on the front side of the drone.
I love the Back to the Future movies and was very much inspired by them when making this unit!!! (my current MK3s+ had a glob attack so I am not able to print this at the moment. So please if you print this share the photo with me!! :)
Simple TPU Capacitor Holder for FPV Racing & Freestyle Drones This is a lightweight, easy-to-use capacitor holder designed specifically for FPV racing and freestyle drones. It’s available in two sizes to accommodate different capacitor…
Capacitor mount: - Rubicon Rubicon 1000uF 35V - 1000uF 35V from SpeedyBee stack
This hold the JHE20B Finder from aliexspress https://www.aliexpress.com/item/1005008246901746.html?spm=a2g0o.order_list.order_list_main.22.5cd01802YPjRWD Print in tpu Use only one screw to hold it into place Use the pusher so you can…
I found a variant of the PCB that has 3 capacitors instead of 1. This remix makes room for that variant.
Printed from TPU with 100% infill. TX holder designed for NANO ELRS Receiver.
This is a lightweight remix of the original SAB iGoblin Pro backup capacitor / buffer pack mount. The solid plate has been replaced with a hex-pattern design to reduce weight while keeping the strength needed for secure mounting. I…
A conical collector used for an Asymmetric Capacitor or 'ion thruster'
In the 70s and 80s Philips made electronic experimentation kits for 7-18 year olds to experiment in electronics and learn how electronics and electricity works. One of the items in the kits was an adapter bracket to use a variable or…
AC condenser Motor run capacitor mount strap printed PETG no supports
Neatly park your RX and Cap between two standoffs.
I wanted to mount the capacitor trashcan to the wall, so I made a shelf! It is simply mounted via two stripes of double-sided tape.
Capacitor holder for a Deep Space Seeker 35 frame. Designed for a 470µF capacitor that comes with the GOKU F722 Pro Mini V2 stack.
This is an enclosure for my build of the Antique Wireless Association Capacitor DC Leakage Tester. The bare board can be purchased from their website. I was able to get the electronics parts from Digikey. If there is interest I can add…
The Mario 5 Capacitor Holder (STL) is a 3D‑printed model designed to securely mount a capacitor onto the Mario 5 drone frame, providing lightweight protection, stable positioning, and reliable integration for FPV setups.
ESC cover for 16MM Motor Mount for Multicopter TL68B19 TL68B20 with enough space for capacitor (e.g. Tarot AIR 20A). For version without capacitor see this model .
It's a holder for a 13 mm diameter capacitor for the MK4 7-inch drone. Also, it holds cables.
Back to the Future Flux Capacitor coaster! Can also be used as a display stand for your BTTF figures! Just follow the settings picture for when to change colors or use the enclosed gcode file. Happy printing!
TPU mounts for a ~10mm x 10mm buzzer and ~10mm x 25mm capacitor. Both fit on 5mm x 25mm standoffs. The capacitor mount features a tie-wrap passthrough for capacitor security. I recommend installing a B2FPV Capacitor Cap and placing the…
Fits both front standoffs and adjusts perfectly behind the front TPU. The button on the side is ideally positioned for the Vifly Finder 2 Buzzer. Choose between 12.5 or 10 mm as the capacitor diameter size.
Redukce pro kondenzator 36mm na držák se závitem M18x1,5 Kondenzátor přilepit lepidlem/silikonem .
SMD Electrolytic Capacitor Toilet Paper Dispenser with Twist Lock and Magnet I work with electronics and use toilet paper daily to clean soldering flux and thermal paste. A roll of toilet paper on the bench, however, looks quite bad and…
I made this to mount the large capacitor that comes with the Jijie (DakeFPV) H743 stack with 70amp ESC in the HGLRC Rekon 10 Pro frame. There isn't much space in the frame for the capacitor, so a discrete mount was the best solution using…
If your electronics project contains large capacitors they might be the only element that has uninsulated terminals that are easily touchable when servicing. This cap give the terminals some protection that is not an unsightly and…
I recently upgraded my ZD-915 de-soldering station. The little DC-DC converter PCB was left over. Instead of sending it to recycling, I soldered on 2 more resistors and modeled this little part so I can safely use it to drain capacitors…
If your electronics project does contain large capacitors, they might have uninsulated terminals that are easy to touch accidentally while working in the electronics cabinet. This cap gives the terminals some protection that is not as…
A simple side mount for a Panasonic EEU-FR1H102 (1000 µF 50V ⌀16 mm/26+ mm) capacitor (27mm long; 16mm diag.). Print with TPU.
TPU Three horizontal and three vertical, one shorter than the other. Two are 13mm inner diameter and there are two that are 12mm inner diameter. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200…
Protection for the front of the AOS 3.5 frame for front cap mounting Printed in TPU, you'll want to use supports - set upper interface layers to 3 and top z distance to 0.3mm to make the supports nice and easy to remove. The base model is…
Mounts for the front of the Pirat Punch for either double capacitors, or a capacitor and a Vifly Finder 2. Also has a pocket for a receiver if you prefer to run it up front.
