1 / 4
Kenair canned air lock — zdjęcie 1
1 / 4

Kenair canned air lock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two part locking mechanism for Kenair cans+valves so they probably won't go off in your bag or when it hits something

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Note: I didn't upload this as a remix because it is an entirely new design based on my own measurements of Kenair valves and cans. But it should be mentioned that the whole idea is basically a copy of Carlvin's "green clean canned air lock". I also made a remix of that one, found in my profile.

I had the black actuator valve, but as far as I know, the blue ones are exactly the same size.

There are three versions, depending on your preference for carabiner holes. Note that hole on the left works for right handed use, and vice versa.

The back side is perfect for adding your name to it. Slicers can do it by adding text as a negative part.

Note that this won't entirely remove the possibility for accidental release of air, but it makes it way less likely. There should be a little friction between the slide part and the rail it moves on. The slide is very tall because otherwise the trigger would flop around, and IMO that wasn't great.

Print in PETG or stronger. 3 walls at least, infill 20% cubic worked for me.

Tagi