1 / 4
Kenair canned air lock — image 1
1 / 4

Kenair canned air lock

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two part locking mechanism for Kenair cans+valves so they probably won't go off in your bag or when it hits something

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
30
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Note: I didn't upload this as a remix because it is an entirely new design based on my own measurements of Kenair valves and cans. But it should be mentioned that the whole idea is basically a copy of Carlvin's "green clean canned air lock". I also made a remix of that one, found in my profile.

I had the black actuator valve, but as far as I know, the blue ones are exactly the same size.

There are three versions, depending on your preference for carabiner holes. Note that hole on the left works for right handed use, and vice versa.

The back side is perfect for adding your name to it. Slicers can do it by adding text as a negative part.

Note that this won't entirely remove the possibility for accidental release of air, but it makes it way less likely. There should be a little friction between the slide part and the rail it moves on. The slide is very tall because otherwise the trigger would flop around, and IMO that wasn't great.

Print in PETG or stronger. 3 walls at least, infill 20% cubic worked for me.

Tags