1 / 2
Frame Caps with TPU O Ring For Honda Ruckus / Zoomer (Fully Printable) — zdjęcie 1
1 / 2

Frame Caps with TPU O Ring For Honda Ruckus / Zoomer (Fully Printable)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flush-fitting frame caps with custom squishy TPU O-rings. Designed for standard Honda Ruckus/Zoomer frames.

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
69
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

1. Main End Cap 

Material: PETG (recommended for UV and outdoor durability) or ABS/ASA

Orientation: Print face-down (flange flat on the build plate). A textured PEI sheet gives it a clean OEM matte finish.

Layer Height: 0.2 mm

Walls / Perimeters: 4

Infill: 15% (Gyroid or Grid)

Supports: Tree supports with an interface roof under the O-ring groove (or no supports if your printer bridges short spans cleanly).

2. O-Ring Gasket

Material: TPU (95A or similar flexible filament)

Orientation: Print flat on the bed 

Walls / Perimeters: 2 (keeps the ring flexible and compressible)

Infill: 15% (Gyroid gives the best squish)

Top/Bottom Layers: 2

Installation

Slide the printed TPU ring into the recessed groove on the cap stem

Firmly press the cap into the open frame tube until the outer flange seats flush against the tube edge.

License & Usage Notice

  • Personal Use Only: This model is shared free for the community.

  • No Commercial Sales: You may not sell the digital files, remix files for sale, or sell physical prints of this design on Etsy, eBay, Amazon, or any other marketplace.

  • Attribution: If you share pictures, videos, or remixes of this print, please credit the original design and link back to this model page.

Tagi