1 / 2
Frame Caps with TPU O Ring For Honda Ruckus / Zoomer (Fully Printable) — image 1
1 / 2

Frame Caps with TPU O Ring For Honda Ruckus / Zoomer (Fully Printable)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Flush-fitting frame caps with custom squishy TPU O-rings. Designed for standard Honda Ruckus/Zoomer frames.

Rating
0 / 5
Likes
2
Downloads
5
Makes
0
Views
71
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

1. Main End Cap 

Material: PETG (recommended for UV and outdoor durability) or ABS/ASA

Orientation: Print face-down (flange flat on the build plate). A textured PEI sheet gives it a clean OEM matte finish.

Layer Height: 0.2 mm

Walls / Perimeters: 4

Infill: 15% (Gyroid or Grid)

Supports: Tree supports with an interface roof under the O-ring groove (or no supports if your printer bridges short spans cleanly).

2. O-Ring Gasket

Material: TPU (95A or similar flexible filament)

Orientation: Print flat on the bed 

Walls / Perimeters: 2 (keeps the ring flexible and compressible)

Infill: 15% (Gyroid gives the best squish)

Top/Bottom Layers: 2

Installation

Slide the printed TPU ring into the recessed groove on the cap stem

Firmly press the cap into the open frame tube until the outer flange seats flush against the tube edge.

License & Usage Notice

  • Personal Use Only: This model is shared free for the community.

  • No Commercial Sales: You may not sell the digital files, remix files for sale, or sell physical prints of this design on Etsy, eBay, Amazon, or any other marketplace.

  • Attribution: If you share pictures, videos, or remixes of this print, please credit the original design and link back to this model page.

Tags