1 / 3
Greenworks 24v battery caddy carrier — zdjęcie 1
1 / 3

Greenworks 24v battery caddy carrier

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A caddy to carry up to four 24 Volt Greenworks batteries

Ocena
0 / 5
Polubienia
11
Pobrania
38
Wydruki
0
Wyświetlenia
149
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a carrier or caddy holder for four 24 volt Greenworks batteries.   I used four of the wall mounts by Kakou-To Xyu on Thingiverse and added a handle based on the Milwaukee carrier by Martin_au.  

Printed in green Jayo PETG (which is a little too shiny) with a color change to black at the top for the words.

I kept the built in handle support Martin_au had in the Milwaukee original model I borrow from.  The only other supports needed are the top of each of the battery slots.  Each slot has two overhangs that need supports (see pictures).  The 3mf file has painted supports and the manual color change at the top for the words.  Also included in the 3mf is a modifier to make the handle slightly stronger.  Not totally needed, but might make it more robust.  Or just use the STL with your own settings.

Tested with OEM 24 volt batteries. Not sure how the big after market batteries with different shapes will work.  Let me know if there are issues.

Thanks to Kakou-To Xyu and Martin_au for the original models I borrowed the parts from. 

Tagi