Arizona sunset hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now you can print that cotton candy sky out for yourself
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As with any hueforge, no mmu is needed!
Project: sonora.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x133mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm
Filaments Used:
#000000 PLA+ Esun Black Transmission Distance: 0.1
#365927 PLA Jessie Premium Green Ice Transmission Distance: 19
#065b4a PLA Prusament Opal Green Transmission Distance: 4.2
#e8e6d0 PLA PolyLite Natural Transmission Distance: 21
#fd636b PLA Jessie Premium Neon Pink Transmission Distance: 2.9
#ffcbac PLA Sunlu Skin Beige Transmission Distance: 7.4
#f56233 PLA Jessie Premium Mystery Orange Transmission Distance: 3.9
#f3d561 PLA PolyLite Pro Light Yellow Transmission Distance: 2.6
#ffffff PLA+ Sunlu White Transmission Distance: 7
This print uses 9 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Green Ice
At layer #8 (0.72mm) swap to Opal Green
At layer #10 (0.88mm) swap to Natural
At layer #12 (1.04mm) swap to Neon Pink
At layer #15 (1.28mm) swap to Skin Beige
At layer #16 (1.36mm) swap to Mystery Orange
At layer #17 (1.44mm) swap to Light Yellow
At layer #18 (1.52mm) swap to White for the rest.