Bangboo Skull Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lamp inspired by the little bangboo lamp in the Random Play popup stores from Zenless Zone Zero.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my first attempt to model something in F360. It's screws into the Bambu Labs LED Lamp 001 Base, I used this version with a closed base and this puck light. I also used a strip of orange vinyl tape to cover part of the bulb to give it a warmer glow.
I'll likely remake the base to be flush with the bangboo at some point.
I recommend printing the bangboo body SLOWLY and checking your slicer for spikes in layer time. Any changes in speed or layer height will be visible when the lamp is on. Your supports should also be dialed in to disconnect without any scarring.
I used Polyterra matte white for the body and Sunlu matte black for the face, YMMV.