1 / 3
SMLIGHT SLZB-MR* Dual Radio Rack Mount (MR5U/MR5/MR2/etc) — zdjęcie 1
1 / 3

SMLIGHT SLZB-MR* Dual Radio Rack Mount (MR5U/MR5/MR2/etc)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the SMLIGHT SLZB-06 Rack Mount with added cutouts to accommodate dual-radio Zigbee coordinators. Tested w/MR5U.

Ocena
0 / 5
Polubienia
4
Pobrania
12
Wydruki
0
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of the SMLIGHT SLZB-06 Rack Mount with added cutouts to accommodate dual-radio Zigbee coordinators. Tested w/MR5U but should work with all dual-radio models in the same footprint.

Printed in PETG; recommended to use PETG/ASA or similar. Print settings used: .2mm layer height, 4 walls, 6 top/bottom layers, 40% gyroid infill. Likely overkill, but this is what I've had success with for rack-mounted parts.

Tagi