1 / 3
SMLIGHT SLZB-MR* Dual Radio Rack Mount (MR5U/MR5/MR2/etc)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the SMLIGHT SLZB-06 Rack Mount with added cutouts to accommodate dual-radio Zigbee coordinators. Tested w/MR5U.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the SMLIGHT SLZB-06 Rack Mount with added cutouts to accommodate dual-radio Zigbee coordinators. Tested w/MR5U but should work with all dual-radio models in the same footprint.
Printed in PETG; recommended to use PETG/ASA or similar. Print settings used: .2mm layer height, 4 walls, 6 top/bottom layers, 40% gyroid infill. Likely overkill, but this is what I've had success with for rack-mounted parts.