1 / 2
TP-Link Archer BE800 – BE19000
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a wall mount solution to get my BE800 up off the ground. I created a mockup and some simple wall mounts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I created a mockup for others who are more creative than me to come up with better mount solutions. My solution does not optimize the routers capabilities, but functionally it works for me.
Print the mounts on its side with supports for the through hole. I would recommend PETG at least and print 4 mounts for the most stable install.
There is a taper for the screw hole, but its not required. The space for the head of the screw is 10mm and the hole is 6mm.