Airbrush holder for a spray booth wall.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rest an Airbrush on the wall of your spray booth.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
You will need to make hole in the side wall of your spray booth to use this holder. I put together the holder and the clamp, positioned it on the spray booth wall and marked thought the hole with a pen, then drill through the mark.
hardware:
M4 nuts X2
25mm M4 screw X1
There is a trapped M4 nut in the ' AIRBRUSH HOLDER W NUT.stl’ in the 3mf file all the supports and insert nut pause instructions are included.
Insert a M4 nut into the 'CLAMP SCREW.stl' and Screw the M4 screw though. Use this to screw to the wall.
I have three different airbrushes and they all fit this holder.
I you wish to attached to the left wall just mirror the parts in your slicer.