Airbrush holder for a spray booth wall.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rest an Airbrush on the wall of your spray booth.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 22
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
You will need to make hole in the side wall of your spray booth to use this holder. I put together the holder and the clamp, positioned it on the spray booth wall and marked thought the hole with a pen, then drill through the mark.
hardware:
M4 nuts X2
25mm M4 screw X1
There is a trapped M4 nut in the ' AIRBRUSH HOLDER W NUT.stl’ in the 3mf file all the supports and insert nut pause instructions are included.
Insert a M4 nut into the 'CLAMP SCREW.stl' and Screw the M4 screw though. Use this to screw to the wall.
I have three different airbrushes and they all fit this holder.
I you wish to attached to the left wall just mirror the parts in your slicer.