1 / 4
Fender Accessories Rugged Case — zdjęcie 1
1 / 4

Fender Accessories Rugged Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A rugged case for Fender Telepaths, Fender Mustang Micro+, and USB power cable for recharging.

Ocena
0 / 5
Polubienia
9
Pobrania
10
Wydruki
0
Wyświetlenia
179
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

For those of you who play electric guitar, I've designed a small case for accessories from Fender.

This rugged case holds a set of Fender Telepaths, a Mustang Micro Plus, and the double-headed USB charging cable that came with the Telepaths. The lid presses together fairly tightly, but there is no rubber/TPU seal, so it is not likely waterproof. The flat faces are 4mm thick, so it is fairly stiff and resilient. The hinges require 26mm x 3mm metal dowels (x6) which are press-fit (they are tight, but can be done by hand, and they don't come out on their own afterward).

Print the top and bottom of case each face down to avoid supports and to get a nice infill pattern (I used Hilbert Curve in PrusaSlicer). I printed snug supports in the hinge holes to ensure they maintained their intended roundness, and these supports are easily pushed out with an allen wrench after the print is done. I printed in PETG, but I should mention that I could not get my Prusa Mk4 to print this in 0.1mm layer height without failing on the overhangs of the lid; it printed flawlessly with 0.2mm layer height though. 

The printed model that is pictured has a Fender emblem on the lid. I didn't realize until I was publishing the remix that the licensing demands for the emblem I remixed conflicts with the licensing for the remixed case, so I cannot publish them together. Sorry. The remix of the Fender emblem is separately published, if you care to grab it.

It's a cool case, though, even without the emblem.

Tagi