DC Brave and Bold Bag Building Game Crisis Dial
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two Dial Types, a Dual Dial that is a standard type 3d printable numbers. And a Single Dial, utilizes stickers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
DC Brave and Bold, Crisis Dial
This is a tracker designed for DC Brave and Bold, Bag Building Game, but it can be used for other games as well.
Use to keep track of number of Non-Crisis Tokens in bag to determine number of Crisis Tokens required to bag.
There is a printable label you can print on sticker sheet specifically for the game that has an image of the Hall of Justice on the front, and a helpful count-chart for the back.
PRINTING TIPS
Tolerances depend on your printer, may need to shave inside of the dials slightly to spin better
My Print Settings:
0.4mm Nozzle, 0.2 Layer Height
20% Infill on Front and Backs
Dial Rivets: 100% Infill, Seam Position: Random (Makes it tighter, aligned works too) Could put drop of glue on to seal the rivets if you want
Dials: 100% Infill, Slow Print Speed down to improve quality
For Single Color Printers Add "Pause" at Layer 10, so you can switch out colors
For Example: Black Dial, with White Text, I pause at Layer 10 to switch to Gray, then pause at Layer 11 to switch to White
NOTES:
Dial Hole Size is 9.75mm
Sand the face of the front and back a little, clean off dust, before applying sticker to help adhesion, use adhesion promoter
Below is what I use make the Labels for the 67 Tracker (most apply to the other tracker for stickers):
- AnyCubic Kobra 2 Pro (3D Printer)
- Silhouette Cameo 4 (Plotter/Craft Cutter)
- Sticker Paper (From Amazon: https://www.amazon.com/dp/B088YFJVKV?_encoding=UTF8&psc=1&re...)
- Matte Laminate (From Amazon: https://www.amazon.com/clp/B0F5B9QTGC?lv=shuf&social_share=c...) Note: cold laminate seems to work best with above sticker paper
- Adhesion Promoter (From Amazon: https://www.amazon.com/dp/B0FR46FCM1?ref=cm_sw_r_cp_ud_dp_2M...) These work pretty good, but don't last long. I sand down the face of the 3d print I am going to stick sticker to, then use this to help adhesion
I laminate the stickers for durability it also helps the dials spin nicely and will protect from any possible scratching.