DC Brave and Bold Bag Building Game Crisis Dial
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two Dial Types, a Dual Dial that is a standard type 3d printable numbers. And a Single Dial, utilizes stickers.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
DC Brave and Bold, Crisis Dial
This is a tracker designed for DC Brave and Bold, Bag Building Game, but it can be used for other games as well.
Use to keep track of number of Non-Crisis Tokens in bag to determine number of Crisis Tokens required to bag.
There is a printable label you can print on sticker sheet specifically for the game that has an image of the Hall of Justice on the front, and a helpful count-chart for the back.
PRINTING TIPS
Tolerances depend on your printer, may need to shave inside of the dials slightly to spin better
My Print Settings:
0.4mm Nozzle, 0.2 Layer Height
20% Infill on Front and Backs
Dial Rivets: 100% Infill, Seam Position: Random (Makes it tighter, aligned works too) Could put drop of glue on to seal the rivets if you want
Dials: 100% Infill, Slow Print Speed down to improve quality
For Single Color Printers Add "Pause" at Layer 10, so you can switch out colors
For Example: Black Dial, with White Text, I pause at Layer 10 to switch to Gray, then pause at Layer 11 to switch to White
NOTES:
Dial Hole Size is 9.75mm
Sand the face of the front and back a little, clean off dust, before applying sticker to help adhesion, use adhesion promoter
Below is what I use make the Labels for the 67 Tracker (most apply to the other tracker for stickers):
- AnyCubic Kobra 2 Pro (3D Printer)
- Silhouette Cameo 4 (Plotter/Craft Cutter)
- Sticker Paper (From Amazon: https://www.amazon.com/dp/B088YFJVKV?_encoding=UTF8&psc=1&re...)
- Matte Laminate (From Amazon: https://www.amazon.com/clp/B0F5B9QTGC?lv=shuf&social_share=c...) Note: cold laminate seems to work best with above sticker paper
- Adhesion Promoter (From Amazon: https://www.amazon.com/dp/B0FR46FCM1?ref=cm_sw_r_cp_ud_dp_2M...) These work pretty good, but don't last long. I sand down the face of the 3d print I am going to stick sticker to, then use this to help adhesion
I laminate the stickers for durability it also helps the dials spin nicely and will protect from any possible scratching.