Depinning stand for Molex Minifit Jr (ATX and PCIe) connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to hold a Molex Minifit Jr (or compatible) connector while using a depinning tool.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I had difficulty using my depinning tool to recover some old connectors from some cables on a PC PSU. The connector slipped and I was trying to balance it off the end of my desk. If you have a vise in your electronics room, you should be able to hold it on that, but if not or if you want a more purpose built stand, here is one.
Photo provided is from a previous revision. The newer revision is a little bit taller to allow a little more room for the cables to come out the bottom. Also I added that text on the photo in my slicer. It's not in the model.
PLA will be fine. ProtoPasta white PLA is what I printed mine in.
OnShape link: https://cad.onshape.com/documents/1fa9617e6252b890104e6ca0/w/2195d90f950a05fbde595f10/e/514959edf9c97a142b685a15