Depinning stand for Molex Minifit Jr (ATX and PCIe) connectors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand to hold a Molex Minifit Jr (or compatible) connector while using a depinning tool.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I had difficulty using my depinning tool to recover some old connectors from some cables on a PC PSU. The connector slipped and I was trying to balance it off the end of my desk. If you have a vise in your electronics room, you should be able to hold it on that, but if not or if you want a more purpose built stand, here is one.
Photo provided is from a previous revision. The newer revision is a little bit taller to allow a little more room for the cables to come out the bottom. Also I added that text on the photo in my slicer. It's not in the model.
PLA will be fine. ProtoPasta white PLA is what I printed mine in.
OnShape link: https://cad.onshape.com/documents/1fa9617e6252b890104e6ca0/w/2195d90f950a05fbde595f10/e/514959edf9c97a142b685a15