V-Core 3 BTT Panda Breath Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for BTT's Panda Breath chamber heater.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The BTT Panda Breath doesn't come with a way to mount it inside a V-Core 3.1, so I came up with this design.
It holds the Panda Breath upright in the back corner of the enclosure. There are two printed parts: a base for the bottom of the unit that bolts to the 3030 extrusion, and a top bracket that pins the top to the side panel so it can't tip forward.
Compatibility
Made for the V-Core 3.1 with an acrylic-panel enclosure. The base mounts through the same holes the bottom acrylic panel already uses, and the top bracket goes through the side panel, so you just need to drill 2 holes in the side panel, or use some VHB tape.
If your enclosure is different from RatRig's 2.0 version, measure first to make sure everything fits.
Hardware
2 x M6 heat-set inserts
1 x M3 heat-set insert
2 x M6x12
Securing the base to the 3030 extrusion, through the bottom acrylic panel holes
2 x M6x35
Securing the top bracket to the side panel (length depends on your panel thickness)
1 x M3x8
Securing the Panda Breath to the top bracket
Printing
I'd recommend ASA or ABS, since it sits right next to the heater. PLA will soften.
I've only tested this on my own machine, so if something doesn't fit on yours, leave a comment. STEP file included for your own modding needs.
Happy printing!
Like what I do and want to support me? [Buy me a coffee!](https://ko-fi.com/bakedbean3d)