Infinity Flow S1 mount for Qidi Plus 4 riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Infinity Flow S1 mount for Qidi Plus 4 riser
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounts an Infinity Flow S1 (may work with S1+ also) to the side of the "Qidi Plus 4 Riser with Sunlu and Vent Stand". Print 2 brackets and mount one to each side using a pair of 3x10 machine screws. Most any filament and reasonable process settings should be fine. If anyone finds that it doesn't work with the S1+ (it probably does) let me know.
A hole is drilled through the side of the riser to allow a PTFE tube to pass into the print chamber. I use a coupler just inside and can swap the internal PTFE tube between the Infinity Flow input and the standard tangled filament sensor input. I found that the filament tangle sensor would cause jamming during spool change-over. As the filament cutters on the Infinity Flow solve tangles through a preferable method, the tangle sensor is not needed when using the Infinity Flow.
I also use this with the "Infinity Flow S1 cutter rigid mount".
https://infinityflow3d.com/products/s1-plus-automatic-filament-loader